武汉夜生活网论坛|武汉桑拿论坛|武汉狼盟|武汉品茶网

    Xinhua News Agency, Beijing, April 17-Israeli media reported on the 16th that the IDF has made a decision on how to respond to the attack launched by "Iran and its agents" on Israel, but the timing of action has not yet been decided.

    On April 15th, Halevy (rear right), Chief of Staff of the Israel Defense Forces, spoke at the Newatim Air Force Base in southern Israel. Xinhua News Agency (Photo courtesy of Israel Defense Forces)

    UN Secretary-General Kofi antonio guterres once again called for restraint. British Prime Minister Rich Sunak told Israeli Prime Minister Benjamin Netanyahu that the escalation of tension in the Middle East is not in the interest of either side and needs to be "cool-headed" at present.

   Israel vowed revenge, but the timing was uncertain.

    According to Israel’s Jerusalem Post on the 16th, the IDF has made a decision on how to respond to the attack of "Iran and its agents". However, because the timing of action has not yet been selected and the preparatory work is complicated, the current plan may also change.

    This is a picture of the interception of the Israeli "Iron Dome" air defense system shot over Jerusalem in the early morning of April 14th. Xinhua News Agency (photo by Jamal awad)

    The Jerusalem Post reported that the above-mentioned important progress shows that the Israeli leadership is serious and firm in its determination to fight back against Iran.

    On the 1st of this month, the building of the consular section of the Iranian Embassy in Syria was attacked by missiles, killing at least 13 people. Iran and Syria say the attack was launched by Israel. Iran’s Islamic Revolutionary Guard announced in the early morning of 14th that it would launch a large number of missiles and drones at Israeli targets. The Israeli military said that more than 300 drones and missiles were fired at Israel, of which "99%" were intercepted.

    Halevy, chief of general staff of the Israeli army, said on 15th that Iran would be "countered" eventually, but he did not specify when and how.

    According to the Associated Press, two American officials were quoted as saying that Israel has not yet told the US how it intends to fight back.

    On the 16th, the Israeli military showed the media the wreckage of an Iranian missile intercepted by the Israeli army at a military base in the south. Daniel Hagari, a spokesman for the Israeli army, said that each warhead carried 500 kilograms of explosives. He reiterated that Israel will strike back at Iran, "at the time and place we choose and in the way we choose."

    The United States seeks sanctions but does not participate in retaliation.

    An Israeli government source told Reuters that the Israeli wartime cabinet meeting scheduled for 16th was postponed to 17th.

    This photo released on April 14th shows that Israeli Prime Minister Benjamin Netanyahu held a wartime cabinet meeting at the Israeli Defense Ministry in Tel Aviv. Xinhua News Agency (Photo courtesy of Israel Government Information Office)

    This will be the third meeting of the Israeli wartime cabinet to discuss the response measures to Iran. After the first two meetings, it was not announced whether to make a decision.

    Israeli Foreign Minister israel Katz said that he had written to more than 30 countries, seeking to impose sanctions on Iran’s missile program and identifying Iran’s Islamic Revolutionary Guard Corps as a "terrorist organization".

    US Treasury Secretary Timothy janet yellen said that the United States will launch new sanctions against Iran and cooperate with its allies, and all options to disrupt Iran’s "terrorist" capital chain are under consideration.

    John Kirby, strategic communication coordinator of the White House National Security Council, said earlier that US President Barack joseph robinette made it clear during his phone conversation with Netanyahu that the United States would not take part in retaliation against Iran.

    Kirby said again on the 15th: "We don’t want to see a war with Iran or a regional conflict." When asked by media reporters whether Biden asked Netanyahu to "restrain" in response to the attack, Kirby did not comment.

    On the 16th, British Prime Minister Sunak telephoned Netanyahu, saying that the escalation of tension in the Middle East is not in the interest of either side, and will only aggravate regional insecurity. Now it is necessary to "keep a cool head".

    On the same day, Italian Defense Minister Guido Crosetto said on the phone with Israeli Defense Minister Joaf galante that the Iranian attack on Israel crossed the "red line", but "now we need to be rational and act in accordance with international law to avoid promoting the continuous escalation of violence". Italy is currently the rotating presidency of the G-7, and the G-7 foreign ministers’ meeting is scheduled to be held for three days from 17th.

   Turkey rejects western "double standards"

    Turkish President Recep Tayyip Erdo? an criticized the "double standards" of western countries on the 16th, saying that the other side kept silent about Israel’s attack on the consular section of the Iranian embassy in Syria, but now it "rushed to condemn Iran’s response". He also pointed out that Netanyahu did not hesitate to push up regional tensions in order to "extend his political career."

    On October 1, 2023, in Ankara, Turkey, Turkish President Erdogan delivered a speech in Parliament. Xinhua News Agency (photo by Mustafa Kaya)

    UN spokesman Stefana Dujaric said on the 16th that UN Secretary-General Guterres telephoned Iranian Foreign Minister Hussein Amir Abdullahiyan on the 15th, once again calling for easing the current tension and bringing peace to the Middle East.

    Dujaric said that Guterres had not spoken to senior Israeli officials, but at the relevant emergency meeting of the United Nations Security Council on 14th, Gilad Aidan, Israel’s Permanent Representative to the United Nations, had heard Guterres’ call, who urged all parties to exercise maximum restraint.

    This round of escalation is the latest manifestation of conflict spillover in Gaza. Saudi Arabian Foreign Minister Faisal bin Farhan Al Saud said on the 16th that the efforts of the international community to promote a ceasefire between Israel and the Palestinian Islamic Resistance Movement (Hamas) in the Gaza are "seriously inadequate".

    Spanish Prime Minister Pedro Sanchez said on the 16th that an independent Palestinian state should be recognized as soon as possible, and "Spain will make efforts to promote the Palestinian state to become a full member of the United Nations". (Chen Lixi)

　　CCTV News:According to "Xiangtan CDC" WeChat WeChat official account news, on October 10th, 2022, a case of asymptomatic COVID-19 infection was found in Xiangtan County, Hunan Province during the quarantine control of key personnel involved in the epidemic, and is currently being isolated and observed in designated hospitals. Xiangtan City and Xiangtan County have immediately launched emergency response, and fully carried out the work of tracing the source, investigation and control, nucleic acid detection and on-site disposal.

　　Main activity track:

　　October 5 th

　　At 10:30, drive from Shangshuyuan, Ganlong, Yisuhe Town, Xiangtan County to Shengshi Kangcheng.

　　Drive to Haitang Garden at 11:00.

　　Drive from Haitang Garden to Changsha at 11:30.

　　13:10 Arrive at the ground parking lot of New Times Square in Kaifu District, Changsha City.

　　Attend the training from 13: 20 to 18: 00 on the 10th floor of North Building of New Times Square.

　　From 18: 00 to 21: 00, have dinner at the Lotus Pond Restaurant opposite New Times Square.

　　At 21:00, I drove back to Xiangtan from Outangbian Restaurant.

　　At 22:30, it passes through the second phase of Napaxigu Community in Yuetang District, Xiangtan City.

　　22:42-23:31 Arrive near Hongsheng Yipin Mansion in Yuetang District and chat on the private car.

　　At 24:00, I passed the Haitang Garden in Yisuhe Town and returned to the home of Shangshuyuan in Ganlong, and did not go out after that.

　　October 6th.

　　At 9:45, I drove from Ganlong Shangshuyuan to the famous teacher’s shop to shampoo.

　　At 10:25, I started from a famous teacher’s shop and stopped at the roadside of Forest Yayuan Community on Dapeng Road for a short time.

　　10:30-11:17 Decoration design in Shengshi Kangcheng.

　　Arrive at Haitang Garden by car at 11:26.

　　At 12:02, I drove from Haitang Garden to Changsha.

　　13:30 Arrive at the ground parking lot of New Times Square in Kaifu District, Changsha City.

　　Attend the training from 13: 30 to 18: 00 on the 10th floor of North Building of New Times Square.

　　18:10-21:00, eat at the Lotus Pond Restaurant opposite New Times Square.

　　At 21:00, take a private car (on behalf of the peers) and leave from the restaurant at Outangbian and return.

　　At 22:00, it passes through the second phase of Napaxigu Community in Yuetang District, Xiangtan City.

　　Arrive at Xiangtan Maternal and Child Health Hospital at 22:15 and stay for about 2 minutes.

　　22:35-23:15 Drive back to Haitang Garden and chat in the car.

　　At 23:24, I drove back to my home in Shangshuyuan, Qianlong, and didn’t go out after that.

　　October 7th.

　　From 11: 50 to 13: 25, drive from Shangshuyuan in Qianlong to attend the wedding in the Lotus Hall on the first floor of Xintian International Hotel.

　　13:46-14:18 Drive to Lianhai Trade City to buy decoration materials.

　　At 14:35, I drove back to my home in Shangshuyuan, Qianlong.

　　21:00-21:04 Drive to Haitang Garden.

　　At 23:10, the self-driving car arrived at the charging station of Jiangwan Square to charge the car.　

　　October 8 th

　　At 1:00, drive back to Ganlong Shangshuyuan from Jiangwan Square charging station.

　　At 15:22, I drove to Xiangtan County People’s Hospital to carry out nucleic acid detection, and then transferred it to a designated hospital for isolation observation. Since October 5, people who have crossed the above activity tracks immediately took the initiative to report to their communities (villages), work units or hotels, and cooperated with the implementation of corresponding prevention and control measures such as centralized isolation, nucleic acid detection and health monitoring. The general public and those who come to (return to) Tan are requested to pay attention to the official authority release, and do not believe in rumors, spread rumors or make rumors; Enhance awareness of prevention, strictly implement the requirements of "health first responsible person", take the initiative to fulfill epidemic prevention obligations, pay attention to their own health status, do personal protection, maintain a safe social distance, and contribute to epidemic prevention and control. Those who do not cooperate with the implementation of prevention and control measures and cause the spread of the epidemic will be investigated for legal responsibility according to law.

　　Now, the candidates and projects recommended by the evaluation committee for the highest science and technology award, natural science award, technological invention award, scientific and technological progress award and international science and technology cooperation award in Shandong Province in 2015 will be publicized to the public.
　　The candidates and projects for publicity were also publicized on the websites of Shandong Provincial People’s Government (http://www.shandong.gov.cn), Shandong Provincial Department of Science and Technology (http://www.sdstc.gov.cn) and Science and Technology Information on November 6, 2015.
　　According to the relevant regulations, if there is any objection to the proposed award candidates and projects publicized, it shall be submitted in writing within 30 days from the date of publicity to the office of Shandong Science and Technology Awards Committee (located in the Science and Technology Achievements Department of the Provincial Science and Technology Department, address: No.607 Shunhua Road, Jinan High-tech Zone, zip code: 250101).

　　Shandong Province Science and Technology Highest Award (2 persons)
Li Shucai
　　Li Shucai, male, born in December 1965, Laishui, Hebei Province, graduated from Shandong University of Science and Technology in 1987. In 1990, he received a master’s degree in geotechnical engineering from Shandong University of Science and Technology, and a doctoral degree in geotechnical engineering from Wuhan Institute of Geotechnical Mechanics, Chinese Academy of Sciences in 1996. He is currently the vice president, professor and doctoral supervisor of Shandong University. In 2006, he was supported by the National Fund for Distinguished Young Scholars, and in 2007, he was selected as a Changjiang Scholar distinguished professor. He has served as deputy director of the Key Laboratory of Geotechnical Mechanics of Chinese Academy of Sciences and vice president and dean of the School of Civil Engineering and Water Conservancy of Shandong University. He is also the vice chairman of the Chinese Society of Rock Mechanics and Engineering and the chairman of the Underground Engineering Branch of the Chinese Society of Rock Mechanics and Engineering. He is the chief scientist of the National 973 Program, the first batch of "Ten Thousand Talents Program" and the national outstanding scientific and technological workers.
　　Professor Li Shucai has been engaged in the research and development of geotechnical engineering for 25 years, and closely combined with the major needs of disaster prevention and mitigation of water inrush and mud outburst in infrastructure construction such as highways and railways, he has created key technologies such as advanced prediction of tunnel adverse geology, prediction, early warning and treatment of water inrush and mud outburst, which has made outstanding contributions to disaster prevention and mitigation in tunnel construction.
　　The theory, method and technology of advanced prediction of unfavorable geology such as tunnel water inrush and mud outburst disaster source were established, and the method and instrument for estimating the water content in front of the tunnel were invented, which realized the three-dimensional imaging of the disaster-causing structure and the estimation of static water storage in the range of about 40m in front of the tunnel. It was successfully applied to the tunnel construction by drilling and blasting method for more than 100 times, and was first carried on the TBM produced by our country. A four-stage comprehensive advanced prediction method and technology are established, which greatly improves the prediction accuracy. It solves the key problems of "undetectable, inaccurate and quantitative" in disaster source prediction.
　　The comprehensive prediction theory and early warning key technology of major water inrush and mud outburst disasters in tunnels are established, and the effective prevention and active regulation of dynamic disasters of water inrush and mud outburst are realized. The method and technology of water inrush and mud outburst disaster control are innovated, and the technical problem of high pressure and large flow dynamic water plugging is solved.
　　The achievements have been successfully applied in a series of national key and difficult projects, such as the high-risk karst tunnel group of Hubei Hurongxi Expressway, Qingdao Jiaozhou Bay subsea tunnel, Chenglan railway tunnel group, Three Gorges dam-turning expressway tunnel group, Hubei West Expressway tunnel group, Jiangxi Jilian Expressway Yonglian Tunnel, Nanjing Metro, Guangzhou Metro and Qingdao Metro, which have avoided the occurrence of major water inrush and mud outburst disasters and ensured the safety construction of the project.
　　Professor Li Shucai presided over more than 20 national science and technology projects, and enterprises and institutions entrusted more than 100 major projects. He won four second prizes for national scientific and technological progress (two first prizes, one second prize and one fourth prize respectively), four first prizes for provincial and ministerial scientific and technological progress (all first prizes), published more than 120 papers included in SCI/EI, published four monographs and authorized 25 invention patents (all first prizes). More than 50 doctoral and master students have been trained.
Chen Zijiang
　　Chen Zijiang, female, born in October 1959, Liuyang, Hunan, is a professor and doctoral supervisor of Shandong University. Graduated from Shandong Medical College in 1984 with a bachelor’s degree in medicine; In 1986, he obtained a master’s degree in obstetrics and gynecology from Shandong Medical College. In 1989, he received a doctoral degree in obstetrics and gynecology from Shandong Medical College. He is currently vice president of Shandong University, director of Qilu Medical Department, director of reproductive medicine research center, director of key laboratory of reproductive endocrinology and Ministry of Education, and director of national assisted reproduction and eugenics engineering technology research center. He is a famous obstetrician and gynecologist, the chief scientist of the National 973 Program, a leading figure in gynecology and endocrinology in China, and a winner of the National "May 1" Labor Medal and the the State Council Municipal Government Allowance. He is currently a core member of several important international academic organizations and enjoys a high international reputation.
　　It has established the only "National Research Center for Assisted Reproductive and Eugenics Engineering Technology" in the field of reproductive medicine in China, pioneered human intrauterine gamete transplantation (GIUT) and ultrasound minimally invasive treatment of polycystic ovary syndrome (PCOS), and successively gave birth to the world’s first GIUT IVF and China’s first IVF IVF IVF. The success rate of its leading team’s assisted reproductive technology (ART) is 55%, which is at the world’s leading level. Through the close combination of assisted reproductive technology and the prevention and treatment of genetic diseases, we have independently developed and applied the preimplantation genetic diagnosis technology covering more than 100 genetic diseases, giving birth to the first healthy offspring of genetic carriers such as hereditary deafness and hepatolenticular degeneration in China, helping more than 1,000 families with a history of genetic diseases to have healthy children every year, making an important contribution to improving the quality of the population.
　　The study of genetic etiology of PCOS has solved the world problem. In-depth study of the etiology and pathology of PCOS and other diseases has found and identified a number of new genes related to the disease, providing new targets for early prevention and treatment of the disease. The results have been published in internationally renowned magazines such as Nature Genetics and American Human Genetics. Professor Strauss, a famous American gynecologist and academician, called it a "major milestone" in the history of PCOS genetics research.
　　Professor Chen Zijiang presided over 3 major national scientific research projects (973 projects), 1 "863" project, 1 special scientific research project of public health industry and 1 key project of National Natural Science Foundation. Won two second prizes for national scientific and technological progress (first and second respectively), one third prize for national invention (second place), one science and technology prize in ho leung ho lee foundation (first place) and one second prize in China Medical Science and Technology Award (first place); Won two first prizes for scientific and technological progress in Shandong Province (both first). Has trained more than 100 doctors, masters and 12 postdoctoral students; There is one excellent blogger in China and three outstanding talents in the new century from the Ministry of Education.
Shandong Natural Science Award
First prize (5 items)
　　1. Research on the theory and application of fractional calculus in abnormal transport process.
　　Completed by: Jiang Xiaoyun (Shandong University)
　　　　　　Wang Shaowei (Shandong University)
　　　　　　Qi Haitao (Shandong University)
　　　　　　Cui Mingrong (Shandong University)
　　2. Fluorescence sensing analysis of intracellular active molecules related to major diseases.
　　Completed by: Tang Bo (Shandong Normal University)
　　　　　　Li Ping (Shandong Normal University)
　　　　　　Li Na (Shandong Normal University)
　　　　　　Wang Xu (Shandong Normal University)
　　3. Basic research and sensing mechanism of paper chip microfluidic based on structural control and photoelectric properties.
　　Completed by: Yu Jinghua (Jinan University)
　　　　　　Ge Shenguang (Jinan University)
　　　　　　Yan Mei (Jinan University)
　　　　　　Huang Jiadong (Jinan University)
　　4. The new discovery and functional study of leprosy dermatosis gene.
　　Completed by: Zhang Furen (Shandong Institute of Dermatology and STD Prevention)
　　Liuhong (Shandong Institute of Dermatology and STD Prevention)
　　Fu Xi ‘an (Shandong Institute of Dermatology and STD Prevention)
　　Wang Chuan (Shandong Institute of Dermatology and STD Prevention)
　　Yang Qing (Shandong Institute of Dermatology and STD Prevention)
　　5. Study on the mining and regulation mechanism of plants’ genes responding to temperature and high salt stress.
　　Completed by Zheng Chengchao (Shandong Agricultural University)
　　　　　　Wu Chang ‘ai (Shandong Agricultural University)
　　　　　　Huang Jinguang (Shandong Agricultural University)
　　　　　　Yan Kang (Shandong Agricultural University)
　　　　　　Yang Guodong (Shandong Agricultural University)
Second prize (9 items)
　　1. Numerical methods of convection-diffusion equation and Stokes-Darcy coupling equation.
　　Completed by: Rui Hongxing (Shandong University)
　　　　　　Wang Kaixin (Shandong University)
　　　　　　Fu Hongfei (Shandong University)
　　　　　　Zhang Ran (Shandong University)
　　2. Dissipation, stability and control of stochastic nonlinear systems.
　　Completed by: Wu Zhaojing (Yantai University)
　　　　　　Cui Mingyue (Qufu Normal University)
　　3. Research on the application of quantum entanglement in quantum information and dynamic manipulation.
　　Completed by: Xia Yunjie (Qufu Normal University)
　　　　　　Man Zhongxiao (Qufu Normal University)
　　　　　　Zhang Yingjie (Qufu Normal University)
　　4. Study on surface wetting bionics and surface/interface mechanics of micro-nano structures.
　　Completed by: Liu Jianlin (China Shiyou University (East China))
　　　　　　Xiare (Wuhan University)
　　5. Structural characteristics and quantum scattering of small molecules
　　Completed by: Zheng Yujun (Shandong University)
　　　　　　Han Boran (Shandong University)
　　　　　　Ding Shiliang (Shandong University)
　　6. Study on the influence of material microstructure and electronic structure regulation on its physical properties.
　　Completed by: Huang Baibiao (Shandong University)
　　　　　　Dai Ying (Shandong University)
　　　　　　Wang Zeyan (Shandong University)
　　　　　　Zheng Zhaoke (Shandong University)
　　　　　　Cheng Hefeng (Shandong University)
　　7. A series of studies on the pathogenesis of immune thrombocytopenia.
　　Completed by: Hou Ming (Qilu Hospital of Shandong University)
　　　　　　Shi Yan (Qilu Hospital of Shandong University)
　　　　　　Peng Jun (Qilu Hospital of Shandong University)
　　　　　　Wang Lin (Qilu Hospital of Shandong University)
　　　　　　Liu Xinguang (Qilu Hospital of Shandong University)
　　8. Microbial monitoring in aquaculture environment and its infection effect and the occurrence, spread and infection mechanism of aerosol.
　　Completed by: Chai Tongjie (Shandong Agricultural University)
　　　　　　Wang Yaling (Shandong Agricultural University)
　　　　　　Li Xiaoxia (Shandong Agricultural University)
　　　　　　Duan Huiyong (Shandong Agricultural University)
　　　　　　Zhong Zhaobing (Shandong Agricultural University)
　　9. Diversity of Genus and Species of Asexual Myxomycetes
　　Completed by: Zhang Xiuguo (Shandong Agricultural University)
　　　　　　Ma Jian (Shandong Agricultural University)
　　　　　　Zhang Yidong (Shandong Agricultural University)
　　　　　　Zhang Kai (Shandong Agricultural University)
　　　　　　Ma Liguo (Shandong Agricultural University)
Shandong Technological Invention Award
First prize (4 items)
　　1. Multi-character compound breeding technology for various aquatic animals.
　　Completed by:
　　Kong Jie (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　Luan Sheng (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　Meng Xianhong (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　Wang Weiji (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　Luo Kun (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　Wang Qingyin (Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences)
　　2. Key technologies and applications of heat-proof, wave-transparent and load-bearing integrated multifunctional materials.
　　Completed by:
　　Wang Chonghai (Sinoma High-tech Materials Co., Ltd.)
　　Wang Hongsheng (Sinoma High-tech Materials Co., Ltd.)
　　Wei Qihong (Sinoma High-tech Materials Co., Ltd.)
　　Li Ling (Sinoma High-tech Materials Co., Ltd.)
　　Liao Rong (Sinoma High-tech Materials Co., Ltd.)
　　Di Ping (Shandong Industrial Ceramics Research and Design Institute Co., Ltd.)
　　3. Analysis method and key control technology of deformation and failure of nonholonomic rock mass under complex conditions.
　　Completed by: Jiang Yujing (Shandong University of Science and Technology)
　　Wang Gang (Shandong University of Science and Technology)
　　Wang Qi (Shandong University)
　　Zhang Bo (Shandong University)
　　Li Fangdong (China Railway 14th Bureau Group Fifth Engineering Co., Ltd.)
　　Wu Xuezhen (Shandong University of Science and Technology)
　　4. Rapid pyrolysis of agricultural and forestry wastes in self-mixing downward circulating fluidized bed and high-value cascade utilization of products.
　　Completed by: Tian Yuanyu (Shandong University of Science and Technology)
　　Qiao Yingyun (Shandong University of Science and Technology)
　　Gaixikun (Shandong University of Science and Technology)
　　Qiao sheng (Beijing news technology co., ltd.)
　　Sun Mingguang (Shandong Innovation Humic Acid Technology Co., Ltd.)
　　Feng Guangxiang (Beijing Aojia Ecological Agriculture Co., Ltd.)
Second prize (7 items)
　　1. Development and application of small and medium-sized energy-saving refrigeration equipment and high-humidity frost-free cold storage.
　　Completed by: Rumeson (shandong institute of pomology)
　　　　　　Wang Shuzhen (shandong institute of pomology)
　　　　　　Yang Juanxia (shandong institute of pomology)
　　　　　　Yulanling (shandong institute of pomology)
　　　　　　Zhang Xuedan (shandong institute of pomology)
　　　　　　Sun Jiazheng (shandong institute of pomology)
　　2. Green preparation, separation and purification technology of chitosan oligosaccharide and oligosaccharide and its application.
　　Completed by: Li Pengcheng (Institute of Oceanography, China Academy of Sciences)
　　　　　　Xing Ronge (Institute of Oceanography, China Academy of Sciences)
　　　　　　Liu Song (Institute of Oceanography, China Academy of Sciences)
　　　　　　Li Kecheng (Institute of Oceanography, China Academy of Sciences)
　　　　　　Qin Yukun (Institute of Oceanography, China Academy of Sciences)
　　　　　　Yu Huahua (Institute of Oceanography, China Academy of Sciences)
　　3. Key technologies of mass storage system
　　Completed by:
　　Wang Endong (Inspur Electronic Information Industry Co., Ltd.)
　　Zhang Haitao (Inspur Electronic Information Industry Co., Ltd.)
　　Wenzhongling (Inspur Electronic Information Industry Co., Ltd.)
　　Li Ruidong (Inspur Electronic Information Industry Co., Ltd.)
　　Zhang Liqiang (Inspur Electronic Information Industry Co., Ltd.)
　　Ge Feng (Inspur Electronic Information Industry Co., Ltd.)
　　4. Development of MRC geo-steering system.
　　Completed by:
　　Yang Jinzhou (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　Zhang Haihua (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　Yang Quanjin (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　Li Shan (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　Xiao Hongbing (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　Qinglong Liu (Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.)
　　5. Green design and manufacturing technology and application of refrigeration household appliances.
　　Completed by: Yin Fengfu (Technology R&D Center of Haier Group)
　　　　　　Liu Zhenyu (Haier Group Technology Research and Development Center)
　　　　　　Li Biao (Haier Group Technology Research and Development Center)
　　　　　　Li Yuxiang (Haier Group Technology Research and Development Center)
　　　　　　Li Hongtao (Haier Group Technology Research and Development Center)
　　　　　　Zhou Xiaodong (Haier Group Technology Research and Development Center)
　　6, heavy oil catalytic cracking to produce more propylene and high octane gasoline new technology
　　Completed by: Yang Chaohe (China Shiyou University (East China))
　　Li Chunyi (China Shiyou University (East China))
　　Zhang Qiang (China Shiyou University (East China))
　　Shan Honghong (China Shiyou University (East China))
　　Gao Chuancheng (Shandong Hengyuan Petrochemical Company Limited)
　　Chen Xiaobo (China Shiyou University (East China))
　　7. Large-area nano-imprint lithography technology, equipment and application
　　Completed by: Lan Hongbo (Qingdao University of Technology)
　　Liu Hongzhong (Xi ‘an Jiaotong University)
　　Jiang Weitao (Xi ‘an Jiaotong University)
　　Zhang Xiufang (Qingdao Jiaxing Jingdian Technology Co., Ltd.)
　　Li Xiaoyan (Qingdao Jiaxing Jingdian Technology Co., Ltd.)
Third prize (2 items)
　　1, the key technology of new anti-infectious diseases in veterinary medicine creation.
　　Completed by: Hao Zhihui (Qingdao Agricultural University)
　　Hu Songhua (Zhejiang University)
　　Mu Xiang (Beijing Agricultural College)
　　Zheng Jifang (Lanzhou Institute of Animal Husbandry and Veterinary Medicine, China Academy of Agricultural Sciences)
　　Li Dinggang (Baoding Jizhong Drug Co., Ltd.)
　　Xu Xiaoxi (Jiangxi Zhongcheng Chinese Medicine Raw Materials Co., Ltd.)
　　2. Development and industrialization of tirofiban hydrochloride and its series preparations.
　　Completed by:
　　Zhang Zeping (Lunan Pharmaceutical Group Co., Ltd)
　　Shiqide (Shandong New Age Drug Co., Ltd.)
　　Wang Haixin (Lunanbeite Pharmaceutical Co., Ltd.)
　　Wang Zhaoqin (Lunanbeite Pharmaceutical Co., Ltd.)
　　Yao Jingchun (Lunan Pharmaceutical Group Co., Ltd.)
　　Liu Bingguang (Lunan Pharmaceutical Group Co., Ltd.)
Shandong province science and technology progress award
First prize (19 items)
　　1. Breeding, popularization and application of a new wheat variety Yannong 5158 with high yield, wide adaptability and high quality.
　　Completed by: Yantai Academy of Agricultural Sciences, Shandong Province.
　　Anhui new century agriculture co., ltd
　　Completed by: Wang Jiangchun, Zhang Shanyong, Liu Xueqing, Xin Qingguo, Yin Yan, Huang Daifeng, Chen Kang, Liu Weizheng, Sun Nina, Ding Xiaoyi, Ding Kai and Yan Meiling.
　　2. Breeding of new onion, ginger and garlic varieties and application of new technologies for safe and efficient production.
　　Completed by: Vegetable and Flower Research Institute of Shandong Academy of Agricultural Sciences.
　　Chinese Academy of Agricultural Sciences Institute of Vegetables and Flowers
　　Northwest A&F University
　　Liaoning Academy of Agricultural Sciences
　　Nanjing Agricultural University
　　Completed by: Chen Yunqi, Wu Xiong, Cheng Zhihui, Li Xixiang, Cui Lianwei, Kong Suping, Liu Bingjiang, Gao Limin, Fang Yong, Huo Yumeng, Yang Yanyan, Liu Bo.
　　3. Research and application of disaster mechanism and reduction prevention and control technology of fruit tree moth.
　　Completed by Institute of Plant Protection, Shandong Academy of Agricultural Sciences
　　Shandong Agricultural University
　　Qingdao agricultural university
　　shandong institute of pomology
　　China Agricultural University
　　Henan University of Science and Technology (HAUST)
　　Completed by: Yu Yi, Ren Fengshan, Li Lili, Du Fengpei, Li Dingxu, Xu Yongyu, Sun Ruihong, Men Xingyuan, Zheng Changying, Li Ruijun, Zhang Sicong and Zhang Ansheng.
　　4. Key technologies for efficient production of edible fungi from breeding wastes and comprehensive utilization of mushroom residues.
　　Completed by: Institute of Agricultural Resources and Environment, Shandong Academy of Agricultural Sciences
　　Shandong Agricultural University
　　Shandong province agriculture technology popularizing station
　　Shandong Qihe Biotechnology Co., Ltd.
　　Shandong zuotianshi biology science and technology co., ltd
　　Completed by: Gong Zhiyuan, Wan Luchang, Pang Maowang, Han Jiandong, Ren Haixia, Yao Qiang, Gao Xia, Huang Chunyan, Ren Pengfei, Jia Le, Li Jin and Song Yisheng.
　　5. Research on key technologies and industrialization demonstration of high-quality and efficient production of beef cattle.
　　Completed by: Animal Husbandry and Veterinary Research Institute of Shandong Academy of Agricultural Sciences.
　　Shandong Agricultural University
　　Shandong province animal husbandry station
　　Linyi huier animal nutrition co., ltd
　　Shandong Wudi Huaxing Bohai Heiniu Seed Industry Co., Ltd.
　　Completed by: Wan Fachun, Liu Guifen, Liu Xiaomu, Hu Hongjie, Tan Xiuwen, Jiang Shuzhen, Song Enliang, Cheng Haijian, Zhao Hongbo, You Wei, Shao Zhumin, Yang Zhangang.
　　6. Pathogenic research and prevention and control technology of four main virus diseases in poultry.
　　Completed by: Poultry Research Institute of Shandong Academy of Agricultural Sciences
　　Shandong province animal epidemic disease prevention Yu control center
　　China Agricultural University
　　institute of microbiology, chinese academy of sciences
　　Ganyuanhao biology co., ltd
　　Completed by: Qin Zhuoming, Fu Tian Lin, Zhang Guozhong, Ai Wu, Xu Huaiying, Liu Wenjun, Wang Youling, Huang Bing, Qi Lihong, Liang Junwen, Yue Jianxin and Huang Dihai.
　　7. Technical system of marine monitoring buoy and its engineering application in national marine monitoring network.
　　Completed by: Institute of Marine Instrumentation, Shandong Academy of Sciences
　　Chinese Marine University
　　Completed by: Liu Shixuan, Wang Juncheng, Li Min, Fan Xiutao, Zhang Shuwei, Guo Fadong, Pei Liang, Chen Shizhe, Zhao Jinping, Wang Xiaoyan, Bu Zhaopeng and Qi Yong.
　　8. Application research and industrialization of high-performance optical fiber devices and sensor networks in oil and gas field.
　　Completed by: Laser Research Institute of Shandong Academy of Sciences.
　　CNOOC Donghai Xihu Oil and Gas Operation Company
　　China Petrochemical Shengli Oilfield Petroleum Engineering Technology Research Institute
　　Completed by: Wang Chang, Guo Shisheng, Sun Baoquan, Liu Xiaohui, Qi Haifeng, Sun Zhihui, Lu Jingsheng, Ni Jiasheng, Yang Ping, Li Shujuan, Song Zhiqiang and Shang Ying.
　　9, large belt conveyor system security key technology
　　Completed by Libo Heavy Industry Technology Co., Ltd.
　　Shandong University of Science and Technology
　　China Mining University
　　Taian yingdili electromechanical technology co., ltd
　　Completed by: Zhou Manshan, Zhang Yuan, Zhou Gongbo, Li Wei, Xiao Linjing, zhangxin, Han Rujun, Yu Tao, Meng Qingrui, Sun Hui, Sun Binwu and Zhang Hua.
　　10, coal mine safety comprehensive monitoring system based on optical fiber sensing network.
　　Completed by: Laser Research Institute of Shandong Academy of Sciences.
　　　　　　　Yankuang group co., ltd
　　　　　　　Shandong languang software co., ltd
　　　　　　　Yanzhou coal industry co., ltd
　　　　　　　Shandong weiguanggan electronics co., ltd
　　Completed by: Zhao Zengyu, Liu Tongyu, Gong Zhijie, Lu Xinming, Ma Junpeng, Song Guangdong, Xie Qiangzhen, Deng Xiaolin, Yan Qinyun, Hao Yingge, Zhao Yanjie and Zhao Lin.
　　11. R&D and industrialization of flame retardant automobile interior leather
　　Completed by: Yantai University
　　　　　　　Shandong quanjie leather institute co., ltd
　　Haining sende leather co., ltd
　　Completed by: Wang Quanjie, Duan Baorong, Tang Zhihai, Ding Haiyan, Zhang Mengmeng, Hou Lijie, Wang Yanqing and Liu Guilin.
　　12, efficient large-scale coal water slurry gasification technology
　　Completed by Yankuang Group Co., Ltd.
　　　　　　　East China University Of Science and Technology
　　Completed by: Zhang Minglin, Yu Guangsuo, Lu Wenxue, Liu Haifeng, King Kong, Zhou Zhijie, Jin Junjie, Dai Zhenghua, Zhu Qingrui, Wang Yifei, Guo Baogui, Wang Fuchen.
　　13. Data accumulation, regularity and shared service of marine environmental corrosion of materials
　　Completed by: Qingdao Institute of Marine Corrosion, Iron and Steel Research Institute.
　　University of Science and Technology Beijing (USTB)
　　Qingdao gang Yan na ke detection protection technology co., ltd
　　Completed by: Li Xiaogang, Han Bing, Wu Junsheng, Yang Chaohui, Cheng Xuequn, Huang Guiqiao, Xiao Kui, Zhang Bo, Du Cuiwei, Dong Chaofang, Ding Guoqing, Jin Gao.
　　14. Development and industrialization of high-grade CNC super-large marine plate bending machine
　　Completed by: Taian Hualu Forging Machine Tool Co., Ltd.
　　Nanjing University of Science and Technology
　　Completed by: Liu Qingyin, Wu Kai, Qian Jianxin, Tian Yanxin, Wang Xiaojian, Chang Xin, Sun Yu, Liu Jingshuo, Cheng Guoren, Zhu Zongqiang and Fan Dianming.
　　15. Key technologies and industrialization of large-scale energy-saving and environment-friendly magnetic levitation centrifugal central air conditioning.
　　Completed by: Qingdao Haier Air Conditioning Electronics Co., Ltd.
　　University of Shanghai for Science and Technology
　　Completed by: Guo Defeng, Zhang Hua, Wang Li, Yang Baolin, Chea Chang, Shi Bin, Zhu Lianfu, Chen Xi, Wang Tiewei and Wang Xiyuan.
　　16, thyroid stimulating hormone (TSH) regulation of cholesterol metabolism mechanism and clinical application.
　　Completed by: Shandong Provincial Hospital
　　Completed by: Zhao Jiajun, Song Yongfeng, Xu Chao, Guan Qingbo, Zhang Haiqing, Zhang Bingchang, Yu Yong, Liu Jun, Tian Xingsong, Yu Chunxiao, Zhang Xu and Gao Ling.
　　17, non-small cell lung cancer diagnosis and treatment of key technologies and clinical application.
　　Completed by: Second Hospital of Shandong University
　　Completed by: Zhao Xiaogang, Du Jiajun, Dong Xiaopeng, Zhai Guangxi, Dong Wei, Wang Guanghui, Peng Chuanliang, Cong Bo and Sun Qifeng.
　　18, early detection and reasonable evaluation of traditional Chinese medicine hepatotoxicity technology platform construction and its scientific application.
　　Completed by: Shandong Institute of Traditional Chinese Medicine
　　China Pharmaceutical University
　　Shandong university of traditional Chinese medicine
　　Peking University
　　Completed by: Sun Rong, Zhang Luyong, Zhang Chengbo, Zhang Qingying, Lu Lili, Jiang Zhenzhou, Li Xiaoyu, Mao Jinlong, Li Xiaoyao, Zhang Limei, Huang Wei, Zou Jingwei.
　　19, proton pump inhibitor drug new preparation system construction and broaden the clinical indications and scale industrialization.
　　Completed by: Shandong Luoxin Pharmaceutical Group Co., Ltd.
　　Shandong yuxin drug co., ltd
　　Shandong hengxin drug co., ltd
　　Completed by: Li Xiaofeng, Wang Jun, Guo Zhongming, Wang Lianhui, Yang Lijuan, Liu Meijuan, Feng Changyun, Zhang Xianzhen, Yang Leixiang, Zhang Mingfa, Zhao Jinlong and Li Zhen.
Second prize (55 items)
　　1. Breeding of Jigu series varieties and light, simple and efficient cultivation techniques.
　　Completed by: Crop Research Institute of Shandong Academy of Agricultural Sciences
　　Completed by: Guan Yan ‘an, Yang Yanbing, Qinling, Zhang Huawen, Wang Hailian, Chen Erying, Du Jinzhe, Liu Bin and Chen Guiling.
　　2. Collection, preservation and development of drought-resistant and salt-tolerant crop germplasm resources in Shandong coastal areas.
　　Completed by Shandong Agricultural Germplasm Resource Center.
　　Completed by: Ding Hanfeng, Zhang Xiaodong, Yu Hua, Kong Weiguo, Li Nana, Li Runfang, Zhang Yu, Wang Junfeng and Dong Wang.
　　3. Research and application of key technologies for intensive and efficient seedling raising of vegetables.
　　Completed by: Shandong Agricultural University
　　　　　　　Shandong Anxin seedling co., ltd
　　　　　　　Shandong shangdao biology science and technology co., ltd
　　　　　　　Shandong province agriculture technology popularizing station
　　　　　　　Zhejiang boren industry & trade co., ltd
　　　　　　　Weifang runpeng seedling co., ltd
　　Completed by: Wei Min, Gao Zhongqiang, Feng Xihong, Han Jishu, Yang Fengjuan, You Kuangbiao, Wu Jinjuan, Xia Xueyi and Hao Guofang.
　　4. Breeding of new blueberry varieties with high irrigation and efficient cultivation techniques.
　　Completed by: shandong institute of pomology
　　Completed by: Liu Qingzhong, Wei Hairong, Zhao Hongjun, Xin Chen, Wang Jiawei, Zong Xiaojuan, Wang Jianghui, Zhang Daohui, Tan Yue.
　　5. Research and application of the evolution law of dominant cotton regions and high-yield and high-efficiency cultivation techniques in Shandong Province.
　　Completed by: Shandong Cotton Production Technical Guidance Station
　　Heze Jin Zhengda ecology engineering co., ltd
　　Shandong cotton research center
　　Completed by: Zhao Hongliang, Yu Qianlin, Li Yuepeng, Luo Zhen, Sun Weiqi, Xu Qinqing, Sun Xuezhen, Zhang Shaohong and Wang Yan.
　　6. Research and application of disaster mechanism of root maggots of leek and garlic and key technologies of green prevention and control.
　　Completed by: Shandong Agricultural University
　　Weifang vocational college
　　Taian agricultural science study institute
　　Jining agricultural science study institute
　　Completed by: Xue Ming, Mu Wei, Liu Feng, Ma Jingyu, Wang Chengxiang, Ma Chong, Zhou Xianhong, Liu Jianping and Xu Jiali.
　　7. Innovation and industrialization of key technologies for safe and efficient feed for pigs and poultry.
　　Completed by: Shandong New Hope Liuhe Group Co., Ltd.
　　Agriculture Department Feed Quality Supervision and Inspection Testing Center (Ji ‘nan)
　　Completed by: Lv Mingbin, Li Xiangming, Guo Jiyuan, Yan Lei, Wang Yongxiu, Li Dianchang, Huang He, Sui Li, Lu Zunzhou.
　　8. Research and application of key technologies of amino acid balance in dairy cows’ diets.
　　Completed by: Shandong Agricultural University
　　Completed by: Lin Xueyan, Wang Zhonghua, Hou Qiuling, Yan Zhengui, Hu Zhiyong, Wang Yun and Shi Kerong.
　　9. Screening of natural drugs against bacterial resistance and research and development of products
　　Completed by Shandong Veterinary Medicine Quality Inspection Institute.
　　Shandong huaerkang veterinary medicine co., ltd
　　Completed by: Gao Yingchun, Zhang Chuanjin, Wei Xiuli, Yang Xiu Town, Su Mei, He Xinli, Wang Tinghong, Feng Tao, Lu Qingquan.
　　10, Platycladus orientalis germplasm resources evaluation, seed selection and cultivation techniques
　　Completed by: Shandong Agricultural University
　　Pingyin county forestry bureau
　　Zaozhuang forestry bureau
　　Zibo Forestry Bureau
　　Taian Taishan forestry science study institute
　　Completed by: Xing Shiyan, Wang Yushan, Liu Weifeng, Lu Benrong, Zhu Wei, Li Jihong, Sang Yalin, Sun Zhongxu and Liu Zhaoquan.
　　11. Construction and application of environmental safety assessment and monitoring system for shellfish culture in key sea areas of Yellow Sea and Bohai Sea.
　　Completed by: Shandong Institute of Marine Resources and Environment
　　First Institute of Oceanography, State Oceanic Administration
　　Shandong province fishery technology popularizing station
　　Shandong province marine biology research institute
　　Completed by: Zhang Limin, Ma Jianxin, Xia Tao, Song Xiukai, Li Lujing, Sun Fuxin, Ma Yuanqing, Xu Yingjiang, Liu Aiying.
　　12, Stichopus japonicus ecological seed cultivation and healthy breeding technology establishment and application.
　　Completed by: Shandong Institute of Marine Biology
　　Huanghai Fisheries Research Institute, Chinese Academy of Fishery Sciences
　　Shandong haodangjia ocean development co., ltd
　　Shandong Anyuan aquatic products co., ltd
　　Dongying haiyue aquatic products technology co., ltd
　　Shandong haiyibao aquatic products co., ltd
　　Yantai haiyi seedling industry co., ltd
　　Completed by: Li Chenglin, Hu Wei, Chen Siqing, Sun Yongjun, Zhao Bin, Changqing, Zou Ange, Han Sha, Wang Liang.
　　13, jack-up platform structure safety technology research and development and application.
　　Completed by: China Shiyou University (East China)
　　Sinopec Shengli Petroleum Engineering Co., Ltd. Drilling Technology Research Institute
　　Completed by: Cao Yuguang, Zhang Shihua, Fan Dunqiu, Huang Xiaoguang, Meng Zhanbin, Shi Yongjin, Sun Yongtai, Sun Xiaoyu and Tian Haiqing.
　　14. R&D and application of new technologies for hydraulic gates and opening and closing systems
　　Completed by: Shandong Water Conservancy Survey and Design Institute
　　Zhongshui North Survey Design Research Co., Ltd.
　　Shanghai survey design & research institute co., ltd
　　Completed by: Du Peiwen, Zhu Fengshan, Zheng Xianghui, Jia Yongming, Zhang Zhengwei, Xu Zhigang, Fan Zhiguo, Cheng Guodong and Zhu Lin.
　　15. Research and application of key technologies for large-scale development of low-grade resources in gold mines.
　　Completed by: Sanshandao Gold Mine of Shandong Gold Mining (Laizhou) Co., Ltd.
　　China Mining University
　　Completed by: Hua Haiyang, Cao Yijun, Wang Baosheng, Xie Minxiong, Zhang Haijun, Qu Gangmin, Ma Zilong, Li Tao and Lu Xintao.
　　16, ilmenite chemical composition standard material development
　　Completed by: Shandong Institute of Geological Sciences
　　Completed by: Hong Fei, Yu Xuefeng, zhaowei, Wang Qing, Mao Meiqiao, Zhang Hall, Cheng Xuehai, Yuan Jiayi, Lv Zhensheng.
　　17, universal collaborative geographic information public service key technologies and platform applications.
　　Completed by: Shandong Institute of Land Surveying and Mapping
　　Wuhan University
　　Beijing Siweitu New Technology Co., Ltd.
　　Completed by Xiang Hengmao, Kong Zhaohui, Wang Yandong, Mao Jijun, Zhang Wei, Sun Jiuhu, Wang Feng, Zhong Jia, Han Haifeng.
　　18, Yanzhou mining area Ordovician limestone high confined water coal seam safety mining key technology research and application.
　　Completed by: Yanzhou Coal Industry Co., Ltd.
　　China University of Mining and Technology (Beijing)
　　China Mining University
　　Completed by: Cao Dingtao, Wu Qiang, Jiang Zhenquan, Zhu Shuyun, Guan Yunzhang, Liu Ruixin, Hu Dongxiang, Zuo Jinzhong and Xu Yi.
　　19, gravel reservoir seismic description technology and supporting application.
　　Completed by: Geophysical Research Institute of Shengli Oilfield Branch of China Petrochemical Company.
　　Completed by: han hongwei, Yu Zhengjun, Lu Shenqiang, Kong Shengwu, Li Jiguang, Miao Yongkang, Zhu Yingke, Pan Xingxiang, Xia Jizhuang.
　　20. Key technologies of seismic sedimentology and their large-scale application in oil and gas reservoir exploration and development.
　　Completed by: China Shiyou University (East China)
　　China Petrochemical Company Shengli Oilfield Branch Geophysical Research Institute
　　China Petrochemical Company Shengli Oilfield Branch Xianhe Oil Production Plant
　　Completed by: Lin Chengyan, Zhang Xianguo, Dong Chunmei, Ren Lihua, Wang Yanguang, Zhang Junhua, Jiao Hongyan, Song Weiqi and Zhang Tao.
　　21, citric acid efficient biological manufacturing technology development and industrialization
　　Completed by Weifang Yingxuan Industrial Co., Ltd.
　　Shandong province food fermentation industry research and design institute
　　Institute of Biology, Shandong Academy of Sciences
　　Completed by: Liu Jianjun, Li Shiyong, Ma Yaohong, Zhang Chuanhui, Li Qiushun, Zhao Xiangying, Li Jian, Ma Qinyuan, Qiao Jun.
　　22. Research and application of detection technology for chemical additives and drug residues in food.
　　Completed by: Shandong Institute of Food and Drug Inspection
　　Completed by: Jonathan Zhu, Alvin Wong, Shi Guosheng, Liu Yanming, Shi Feng, Zhang Xiqi, Zhang Hui, Hu Mei and Shen Zhonglan.
　　23. Key technologies and industrialization of high-efficiency self-cleaning functional cotton fabrics.
　　Completed by Lutai Textile Co., Ltd.
　　Jiangnan University/ Southern Yangtze University
　　Shandong university of technology
　　Completed by: Zhang Jianxiang, Jiang Xue, Huang Dan, Liu Zibin, Du Jinmei, Ni Aihong, Wang Hongbo, Wang Weiwei and Cai Haijuan.
　　24. Screening of marine microalgae with high DHA production and demonstration project of cleaner production
　　Completed by: Qingdao Langyatai Group Co., Ltd.
　　qingdao institute of biomass energy and bioprocess technology, chinese academy of sciences
　　Completed by: Cui Qiu, Li Yueming, Song Xiaojin, Xu Jianchun, Li Xia, Feng Yingang, Xia Xiuluan, Tan Yanzhen and Gao Mang.
　　25, based on biomass nutrients and biological sterilization disease-resistant and efficient urea production system construction and industrialization.
　　Completed by: Shandong Runyin Biochemical Co., Ltd.
　　China Academy of Agricultural Sciences Institute of Agricultural Resources and Agricultural Regionalization
　　Shandong enbao biology science and technology co., ltd
　　Completed by: Meng Guangyin, Lin Jiong, He Shuwen, Zhang Chengsheng, Wang Zhiyong, Li Qiang, Chen Zhenwei, Yuan Liang and Zhang Shoufu.
　　26. Construction and industrialization of a new preparation system of cefoxitin sodium based on key technologies and pharmaceutical preparations.
　　Completed by: Shandong Hengxin Pharmaceutical Co., Ltd.
　　Shandong yuxin drug co., ltd
　　Shandong luoxin pharmaceutical group co., ltd
　　Completed by: Chen Yu, Song Liangwei, Wang Ping, Song Lili, Li Fan, Ruan Chaobin, Liu Yanzhen, He Yaguan and Chai Qian.
　　27. Construction and industrialization of new preparation system of environmental protection and energy-saving glass fiber based on boron-free and fluorine-free
　　Completed by Taishan Glass Fiber Co., Ltd.
　　Completed by: Tang Zhiyao, Li Yongyan, Zhang Degang, Liu Honggang, Yang Hao, Wang Jiafang, Ming Licheng, Xu Yanchao and Liu Lifeng.
　　28, silicon carbide composite ceramic material preparation technology and application
　　Completed by Shandong Baona New Materials Co., Ltd.
　　Shandong University
　　Completed by: Zhang Yujun, Zhaomin Li, Zhai Yanxia, Li Wenjie, Sun Haibin, Li Qisong, Liu Huan, Song Jianfeng.
　　29. Development and application of complete sets of technologies for treating sour gas containing sulfur in refining and chemical industry.
　　Completed by Qilu Branch of China Petrochemical Co., Ltd.
　　Shandong Qilu keli chemical industry research institute co., ltd
　　Completed by: Da Jianwen, Liu Aihua, Xu Xingzhong, Liu Jianli, Tao Weidong, Xu Jinshan, Wang Jianhua, Gao Buliang and Liang Yingjie.
　　30. Construction, development and application of new process system based on deep extraction of complex gold and silver concentrate and green industrialization.
　　Completed by: Jinjiling Gold Mine of Zhaojin Mining Co., Ltd.
　　Completed by: Li Xueqiang, Xu Zhongmin, Weng Zhanping, Gao Lifa, Shen Shubao, Liu Zhixin, Cheng Tai, Yang Guangjie and Guo Hongzhu.
　　31, near net shape beam blank continuous casting process technology integration and innovation
　　Completed by Laiwu Iron and Steel Group Co., Ltd.
　　Completed by: Li Hongjian, Wu Guangjun, Wang Zhongxue, Guo Weida, Zhang Jie, Lu Bo, Ning Wei, Feng Qichao and Zhang Haibo.
　　32. Development and application of high-efficiency switched reluctance motor drive system
　　Completed by Shandong Kehui Electric Power Automation Co., Ltd.
　　Shandong university of technology
　　Shandong rifa textile machinery co., ltd
　　Completed by: Xiong Lixin, Jia Mingquan, Bian Dunxin, Zhao Tingting, Sun Qingjun, Xu Bingyin, Zhang Mingkui, Wang Qinchang and Cheng Jianjun.
　　　　　　　　　　　　　　　　
　　
　　33, electric vehicle charging and replacing facilities efficiency improvement and operation technology research and application.
　　Completed by: State Grid Shandong Electric Power Company
　　Shandong Electric Power Research Institute
　　Shandong luneng intelligent technology co., ltd
　　Completed by: Cai Guangdao, Gao Yuming, Li Jianxiang, Zhang Jian, Justin, Zhang Huadong, Guo Liang, Song Haifeng and Liu Haibo.
　　34, insulator string detection robot
　　Completed by: State Grid Shandong Electric Power Company
　　State Grid Shandong Electric Power Company Electric Power Science Research Institute
　　Shandong luneng intelligent technology co., ltd
　　Completed by: Kuoray, Han Lei, Yong Jun, Wang Chuanqing, Ren Jie, Sun Yutian, Shen Qinghe, Zhang Feng and Cao Lei.
　　35, including large-scale wind power grid generation scheduling mode and key technology research and application.
　　Completed by: Shandong Electric Power Dispatching and Control Center
　　Tsinghua University
　　Beijing Qing da ke yue technology co., ltd
　　Completed by: Qiu Xizhao, Zhong Haiwang, Xia Qing, Yang Minghui, Zhang Jian, Zhang Guoqiang, Guo Shaoqing, Yuan Sen and Cheng Yan.
　　36, underground engineering through water-rich soft stratum major disaster control technology.
　　Completed by: Shandong University
　　China railway 19 th bureau group 5 th engineering co., ltd
　　Shaanxi Luqiao group first engineering co., ltd
　　Ji’ nan liwen geotechnical engineering co., ltd
　　Completed by: Zhang Qingsong, Liu Rentai, Zhang Xiao, Lin Chunjin, Wang Chaochao, Yang Weimin, Li Liping, Fan Yanxiang, Hu Wei.
　　37, urban water supply system monitoring and early warning of sudden pollution and emergency treatment technology research and application.
　　Completed by: Jinan Water Supply and Drainage Monitoring Center
　　Tsinghua University
　　Ji’ nan Qingyuan water group co., ltd
　　Ji’ nan quancheng water co., ltd
　　Shenzhen qingshijie technology co., ltd
　　Hangzhou lvjie water technology co., ltd
　　Shandong Shanda huate technology co., ltd
　　Completed by: Jia Ruibao, Zhang Xiaojian, Sun Shaohua, Chen Chao, Pan Zhangbin, Ma Zhongyu, Song Wuchang, Liu Minghui and Cui Pengwei.
　　38. Innovative technology and engineering application of point-supported glass curtain wall and lighting roof
　　Completed by: Tianyuan Construction Group Co., Ltd.
　　Tsinghua University
　　Harbin Institute of Technology
　　China construction science research institute
　　Shandong University of Science and Technology
　　China Wuzhou Engineering Design Group Co., Ltd.
　　Shenzhen mainuo curtain wall technology co., ltd
　　Completed by: Liu Jun, Wang Yuanqing, Wu Yue, Liu Jian, Shi Yongjin, Wang Lai, An Baiping, Ding Dayi, Liao Dongfan.
　　39. Research, development and application of laying and discharging technology and deep-water laying and discharging equipment in severe working conditions of Yangtze River deepwater channel regulation project.
　　Completed by: No.2 Engineering Co., Ltd. of China Communications No.1 Navigation Bureau.
　　Completed by: Liu Dejin, Qu Lili, Feng Haibao, Xu Shanzhong, Ma Zongtian, Yang Ruiliang, Sun Liang, Fu Dawei, Zhang Qingwen.
　　40, the Yellow River Delta asphalt pavement water damage fluid-solid coupling mechanism, damage assessment method and prevention technology.
　　Completed by: Shandong Binzhou Highway Engineering Corporation
　　Shandong University
　　Highway Science Research Institute of Ministry of Transport
　　Completed by Cui Xinzhuang, Wang Tao, Qi Chunguang, An Zhicun, Guan Yanhua, Chang Chengli, Ding Guanxu, Liu Yanbing, Zhang Jiong.
　　41, high concentration organic wastewater catalytic wet oxidation treatment technology
　　Completed by: Wanhua Chemical Group Co., Ltd.
　　Dalian Institute of Chemical Physics, Chinese Academy of Sciences
　　Completed by: Sun Chenglin, Hua Weiqi, Wei Huangqi, Zhang Hongke, He Songbo, Yu Tianyong, Liu Xiaogao, Hu Zhan and zhaonan.
　　42, functional imaging and molecular targeted guided precise radiotherapy of chest tumor.
　　Completed by: Shandong Institute of Cancer Prevention and Treatment.
　　Completed by: Yuan Shuanghu, Jiang Xiaodong, Xia Bing, Hu Xudong, Li Minghuan, Liu Ning, Yu Qingxi, zhaowei and Zhou Bo.
　　43. Neuroinflammatory mechanism of Alzheimer’s disease and new targets of drug intervention.
　　Completed by: Qingdao Municipal Hospital
　　Completed by: Tan Lan, Yu Jintai, Wang Ping, Tan Mengshan, Miao Dan and Zhang Qun.
　　44, the basic and clinical application of chronic liver disease related to hepatitis B virus.
　　Completed by: No.88 Hospital of PLA
　　Liberation Army No.302 Hospital
　　Peking University Health Science Center
　　Completed by: Shang Qinghua, Wang Yongqing, Zhang Zheng, Liu Xueen, Zhang Wei, Jin Lei, Zhuang Hui, Yu Jianguo and Zhang Guangshu.
　　45. Individualized carotid endarterectomy and its perioperative complications prevention strategies.
　　Completed by: Liaocheng People’s Hospital
　　xuanwu hospital capital medical university
　　Tang Dou Hospital of the Fourth Military Medical University of Chinese People’s Liberation Army
　　Completed by: Wang Jiyue, Zhang Liyong, Lin Kai, Hao Jiheng, Jiao Liqun, Chen Yanfei, Ling Feng, Zhao Zhenwei, Deng Jianping.
　　46, the establishment and application of key technology of minimally invasive surgical closure of structural heart disease.
　　Completed by: Shandong Provincial Hospital
　　Completed by: Li Hongxin, Zhang Haizhou, Guo Wenbin, Liang Fei, Zou Chengwei, Yuan Guidao, Wang Zhengjun and Zhang Wenlong.
　　47. Dynamic study and application of laryngeal function preservation and reconstruction and oncogene serology in laryngeal cancer
　　Completed by: Yantai Yuhuangding Hospital
　　Completed by: Song Xicheng, Zhang Hua, Yan Sun, Wang Li, Liu Zhonglu and Rebecca.
　　48. Evaluation technology and application of cardiovascular activity of traditional Chinese medicine based on zebrafish model
　　Completed by: Institute of Biology, Shandong Academy of Sciences
　　kunming institute of botany, chinese academy of sciences
　　Shandong University
　　Shandong wohua medical technology co., ltd
　　Shenyang Pharmaceutical university
　　Completed by: Liu Kechun, He Qiuxia, Han Liwen, Peng Weibing, Li Xiaoli, Chen Xiqiang, Zang Hengchang, Zeng Yingzi and Yang Yongping.
　　49. Etiological equivalent analysis and clinical application of pulmonary diseases
　　Setting: Affiliated Hospital of Shandong University of Traditional Chinese Medicine.
　　Completed by: Zhang Wei, Zhu Xue, Chen Xianhai, Jia Xinhua, Zhang Xinyue, Zhang Cai Qing, Ding Meng, Tian Xue and Zhang Yang.
　　50. New preparation system and industrialization of salbutamol sulfate aerosol based on tetrafluoroethane replacing Freon.
　　Completed by Shandong Jingwei Pharmaceutical Co., Ltd.
　　Shanghai Food and Drug Inspection Office
　　Shanghai huarui aerosol co., ltd
　　Completed by: Li Tiejun, Yu Yuntao, Zhang Zhichao, Chen Guiliang, Zhang Yan and Wang Zhenyong.
　　51, L- arginine clean production process research and development
　　Completed by Shandong Fufeng Fermentation Co., Ltd.
　　Shandong University
　　Qilu university of technology
　　Shandong fufeng biotechnology development co., ltd
　　Completed by: Liu Xinli, Hu Wei, Li Deheng, Zhao Lin, Feng Zhenquan, Tang Yongqiang, Li Shubiao, Zhao Lankun and Liu Yuantao.
　　52, transgenic corn environmental safety monitoring technology and application
　　Completed by Institute of Plant Protection, Shandong Academy of Agricultural Sciences
　　Completed by: Lu Xingbo, Sun Hongwei, Fan Li, Yang Shuke, Yue Aidong, Xu Xiaohui, Gao Rui, Yuan Lei and Feng Liping.
　　53. Research and application of rapid detection technology of pesticide residues in vegetables based on biosensor.
　　Completed by: Shandong University of Technology
　　Zibo vegetables office
　　Beijing Qiangsheng Minghe Science and Technology Development Co., Ltd.
　　Shandong anbo instrument co., ltd
　　Completed by: Sun Xia, Guo Yemin, Wang Xiangyou, Xu Jianguang, Zhao Wenping, Wang Shujun, Ding Yan, Liu Shanfei and Qi Bin.
　　54. Technological innovation system of brown algae bio-industry
　　Completed by: Qingdao Mingyue Seaweed Group Co., Ltd.
　　55, drug research and development technology innovation platform (enterprise technology innovation)
　　Completed by Disha Pharmaceutical Group Co., Ltd.
Third prize (36 items)
　　1. Breeding of disease-resistant and storable tomato varieties and innovation and application of high-efficiency cultivation techniques.
　　Completed by Shouguang New Century Seedling Co., Ltd.
　　Northeast agricultural university
　　Shandong province vegetables cultivation engineering technology research center
　　Completed by: Hu Yongjun, Xu Xiangyang, Sang Yizhen, Jiang Jingbin, Tian Subo, Zhang Yunming.
　　2. Breeding of new peach varieties with high quality and integration of key cultivation techniques.
　　Completed by Weifang Academy of Agricultural Sciences, Shandong Province
　　Completed by: Lin Yundi, Wei Yongyang, Zhao Qingzhu, Han Xia, Zhang Dongqi, Gao Jing
　　3. Development and application of key technology of new degradable coated controlled release fertilizer.
　　Completed by: Jin Zhengda Ecological Engineering Group Co., Ltd.
　　Dezhou Jin Zhengda ecology engineering co., ltd
　　Jin Zhengda Notaire chemistry co., ltd
　　Completed by: Zhang Qiang, Wang Huaili, Liu Wenlong, Dong Yan, Li Jiguo and Hu Bin.
　　4. Research and application of pathogen identification and integrated prevention and control technology of peanut diseases in Shandong.
　　Completed by Institute of Plant Protection, Shandong Academy of Agricultural Sciences
　　Shandong peanut institute
　　Fujian Kaili biology products co., ltd
　　Taian agricultural science study institute
　　Yantai agriculture technology popularizing center
　　Completed by: Li Changsong, Chi Yucheng, Zhang Yueli, Jaco, Xu Manlin and Liu Tingli.
　　5. Research and application of rubber recycled concrete to improve the durability of small and medium-sized hydraulic structures.
　　Completed by: Shandong Institute of Water Conservancy.
　　Shandong jiaotong university
　　Beijing University of Technology
　　Completed by: Wang Keliang, Cheng Suzhen, Li Yue, Xu Shangjie, Liu Ling, Hu Tingzheng.
　　6. Development and industrialization of high-speed PON optical module technology
　　Completed by: Qingdao Hisense Broadband Multimedia Technology Co., Ltd.
　　Completed by: Zhang Hua, Zhao Qisheng, Wu Xigui, Yang Sigeng, Zhang Qiang and Xue Dengshan.
　　7. Development and application of multifunctional experimental equipment for engineering mechanics.
　　Completed by: Yantai University
　　Zhejiang University
　　Completed by Qu Shuying, Wu Jianglong, Lu Yang, Chen Yibao, Lian Jingzhou, Hou Xingmin.
　　Post-peak strength evolution law of surrounding rock in 8,000-meter deep mine roadway and its control key technology
　　Completed by Yuncheng Coal Mine, Shandong Province
　　China Mining University
　　Completed by: Wen Quan, Hu Chuanting, Wang Yingchao, Zhang Shidong, Jing Hongwen, Yue Lei.
　　9. Development and application of dynamic monitoring and risk analysis technology for rockburst disaster in deep wells.
　　Completed by: China Mining Gold Industry Co., Ltd.
　　University of Science and Technology Beijing (USTB)
　　Beijing Research Institute of Mining and Metallurgy
　　Completed by: Li Jianbo, Ji Hongguang, Yang Xiaocong, Lu Mingfu, Song Hongyu and Hu Shouquan.
　　10. Key technologies, system integration and application of comprehensive monitoring of ecology and human settlements in the Yellow River Delta.
　　Completed by: Jinan University
　　institute of geographic sciences and natural resources research,cas
　　Shandong Normal University
　　Completed by: Liu Gaohuan, Xu Zhenghe, Liu Qingsheng, Huang Fei, Chang Jun, Song Chuangye.
　　11, low permeability sandstone reservoir protection drilling and completion fluid technology
　　Completed by: Drilling Technology Research Institute of Sinopec Shengli Petroleum Engineering Co., Ltd.
　　Completed by: Tang Zhijun, Li Gongrang, Zhang Jinghui, Lan Qiang, Li Haibin and Yang Jingli.
　　12, permanent magnet synchronous inverter compressor adaptive control key technology research and industrialization.
　　Completed by Hisense (Shandong) Air Conditioning Co., Ltd.
　　Completed by: Zhang Yongliang, Yin Development, Zhao Keke, Li Benwei, Yin Xianxin and Wang Zongliang.
　　13, color corrugated cardboard key technology and production application.
　　Completed by: Shandong Century Sunshine Paper Group Co., Ltd.
　　Changle xinmai paper industry co., ltd
　　Completed by: Sheng Yongzhong, Wang Dongxing, Ci Xiaolei, Zhao Changzheng, Zhi Weixin and Zhang Zengguo.
　　14, instant rice development and industrialization technology development.
　　Completed by: Rizhao Juxian Jinsui Industry and Trade Co., Ltd.
　　Shandong academy of agricultural sciences agriculture products institute
　　Completed by: Liu Runshu, Tao Haiteng, Zong Aizhen, Dong Shuangjun, Qiu Jiying and Liu Guangyuan.
　　15. Key technologies and equipment for clean production of xylitol from corncob.
　　Completed by: Shandong Futian Pharmaceutical Co., Ltd.
　　Beijing University of Chemical Technology
　　Completed by: Yuan Qipeng, Sun Lu, Wang Xingyun, Wang Wenya, Li Shuangxi and Wang Chengfu.
　　16, peanut functional factor preparation technology research and development and application.
　　Completed by: Institute of Agricultural Products, Shandong Academy of Agricultural Sciences
　　Shandong Gaotang Lanshan Group Corporation
　　Shandong longda vegetable oil co., ltd
　　Shandong jinsheng grain and edible oil group co., ltd
　　Completed by: Xu Tongcheng, Liu Lina, Qiu Bin, Han Wei, Wang Wenliang and Liu Wei.
　　17, neonicotinoid insecticide nitenpyram technical and environmental friendly preparation of key technology development.
　　Completed by: Hailier Pharmaceutical Group Co., Ltd.
　　Qingdao university of science and technology
　　Completed by: Han Xianzheng, Wang Guangjian, Ge Yaolun, Yan Xiuwei, Chen Long Li and Wang Xu.
　　18, electronic grade solid amino trimethylene phosphonic acid preparation process.
　　Completed by Shandong Taihe Water Treatment Co., Ltd.
　　Completed by: Cheng Zhongfa, Qi Xiaojing, Wan Zhentao, Wang Yanping, Zhang Wujin, Liu Quanhua.
　　19. Development of high-purity TFT monomer liquid crystal material (nmC)
　　Completed by: Yantai Wanrun Fine Chemical Co., Ltd.
　　Completed by: Jiang Xuesong, Fu Shaobang, Yi Zhaohui, Li Yonggang, Li Peng, Li Ning.
　　20. R&D and industrialization of trifluoropropene and its series of high-performance fluorosilicone materials
　　Completed by Weihai Xinyuan Chemical Co., Ltd.
　　Shandong University
　　Jinan university
　　Completed by: Xie Lefu, Zhang Yiying, Feng Shengyu, Zhang Shuxiang, Zhang Diansong, Lv Jian.
　　21, pharmaceutical glass molding bottle key technology application research and industrial development.
　　Completed by Shandong Medical Glass Co., Ltd.
　　Completed by: Hu Yonggang, Zhang Jun, Su Yucai, Chen Gang, Wang Yuwei.
　　22, high performance perfluoroethylene propylene resin new technology research and development and industrialization
　　Completed by Shandong Huaxia Shenzhou New Materials Co., Ltd.
　　Completed by: Wang Hanli, Wang Jun, Yu Hao, Xu Qinggang, Wu Haipeng and Zhou Hongjun.
　　23, million kilowatt pressurized water reactor nuclear power plant forging main pipeline technology
　　Completed by: Yantai Taihai Manuer Nuclear Power Equipment Co., Ltd.
　　China Nuclear Power Research and Design Institute
　　Completed by: Li Zhengjun, Liu Xianghong, Zhao Tianming, Pu Xiaofen, Wang Baoping, Ren Yun.
　　24, aluminum alloy casting composite technology and equipment
　　Completed by Shandong nanshan aluminum Co., Ltd.
　　Northeastern University
　　yantai nanshan university
　　Completed by: Cheng Rence, Cui Jianzhong, Lv Zhengfeng, Qin Ke, Zhang Haitao, Yu Yujiang.
　　25, CNC automatic vertical multi-station stator winding machine
　　Completed by Shandong Zhongji Electrical Equipment Co., Ltd.
　　Completed by: Wang Weixiu, Wang Cesheng, Cheng Xuehu, Wang Xiren, Li Fuguo, Ma Chao.
　　26. Research and application of high-efficiency and energy-saving control technology and core component processing technology of crawler bulldozer.
　　Completed by: Shantui Construction Machinery Co., Ltd.
　　Completed by: Zhang Liyin, Hou Wenjun, Sean, Zhao Jianjun, Li Xuanqiu and Wan Guangqian.
　　27, new flexible high-voltage dynamic reactive power compensation device key technology research and development and industrialization application.
　　Completed by: Shandong Taikai Power Electronics Co., Ltd.
　　Completed by: Fan Deping, Feng Li, Kang Changlu, Liu Qihui, Ning Shen and Song Yuewen.
　　28, high-grade highway semi-rigid base damage theory, control method and engineering application.
　　Completed by: Shandong Institute of Transportation Science.
　　shandong jianzhu university
　　Completed by: Wei Jincheng, Wang Lin, Ma Shijie, Yu Sixin, Han Wenyang and Fu Jiancun.
　　29. Development of 160km diesel multiple unit exported to Iraq.
　　Completed by CSR Sifang Vehicle Co., Ltd.
　　Completed by Rao Zhen, Zheng Kuixian, Wang Xiaofeng, Sun Mintang, An Hailiang, Liu Xiaoguang.
　　30. Comprehensive treatment and resource utilization technology of oil sludge and sand
　　Completed by: Shandong University
　　Gudong Oil Production Plant of Shengli Oilfield Branch of China Petrochemical Co., Ltd.
　　Completed by Hou Wanguo, Tang Zhiqiang, Gao Jutong, Yan Jingen, Liu Chunbo, Huang Chun.
　　31. Study on the evolution and recombination of human enterovirus in human population and environment and the integration of new viruses.
　　Completed by Shandong Provincial Center for Disease Control and Prevention.
　　Completed by: Xu Aiqiang, Wang Haiyan, Tao Zexin, Lin Xiaojuan, Song Lizhi and Wang Suting.
　　32, bladder cancer tumor microenvironment simulation and related molecular mechanisms.
　　Completed by: Affiliated Hospital of Qingdao University.
　　No.401 hospital of PLA
　　Completed by: Niu Haitao, Wang Xinsheng, Xu Ting, Sun Lijiang, Cao Yanwei and Jiang Haiping.
　　33. Study on the application of new quantitative indexes of spiral CT in aortic dissection
　　Completed by: Qilu Hospital of Shandong University
　　Beijing anzhen hospital affiliated to Capital Medical University.
　　Completed by: Zhao Xin, Qi Ruidong, Bi Yanwen, Song Guangmin, Li Chuanbao and Sun Lizhong.
　　34. Mechanism and clinical application of diabetes affecting corneal epithelial wound healing.
　　Completed by: Qilu Hospital of Shandong University
　　Completed by: Wu Xinyi, Shi Long, Zhang Ying, Chang Yuan, Yu Xiaoming and Yang Yongmei.
　　35. Basic and clinical research on one-stage resection, functional preservation and reconstruction of hypopharyngeal cancer and cervical involved tissues.
　　Completed by: Qilu Hospital of Shandong University
　　Completed by: Xinliang Pan, Liu Dayu, Jin Tong, Lei Dapeng, Wei Dongmin and Qian Ye.
　　36, drug impurity control and evaluation of key technology platform construction and application
　　Completed by: Shandong Institute of Food and Drug Inspection
　　Completed by: Li Jun, Wang Weijian, Zhu Qingfen, Niu Chong, Zhang Zhonghu, Gong Liping.
Shandong International Science and Technology Cooperation Award
(3 persons)
　　1. Wang Dunyou
　　Country: USA
　　Partner: Shandong Normal University
　　2. Chis Eugen Jochem reinas
　　Country: Netherlands
　　Partner: Yantai CIMC Raffles Offshore Engineering Co., Ltd.
　　3. John FerAdrian Wen
　　Country: Belgium
　　Cooperative unit: Weihai Goldsun Photothermal Power Generation Equipment Co., Ltd.

　　() F10 data shows that on March 4, 2024, () theme points have been updated and adjusted:

　　Proposed layout of short drama business

　　On December 2, 2023, the announcement of the company’s change revealed that recently, some media reported that the company was involved in "short drama concept stocks". Up to now, the company’s operating income structure does not involve short drama business, and the short drama business has no impact on the company’s performance. Investors are advised to pay attention to investment risks and invest rationally. On November 7, 2023, the company disclosed on the interactive platform that short plays are a very popular content ecology recently. Our company’s business is based on content, and we are also actively deploying short play business. We have done a lot of preparatory work from script selection and creation, copyright purchase and content production. The profit model of short play business needs further verification, but we believe that the core logic of short play market is content is king. As a company operating on content and copyright, we will definitely compare ourselves.

　　Short drama business "fast burning" APP internal test

　　On December 5, 2023, the announcement of the company’s change revealed that recently, some media reported that the company involved "short drama concept stocks". Up to now, the company’s operating income structure does not involve short drama business, and the short drama business has no impact on the company’s performance. The company’s short drama business "Fast Burning" APP has completed the technical construction, and the APP is now in the internal testing stage. There are uncertainties in the online time, profit model and profitability of the "fast burning" APP. Investors are requested to objectively analyze the company’s operating environment and invest rationally. On November 7, 2023, the company disclosed on the interactive platform that short plays are a very popular content ecology recently. Our company’s business is based on content, and we are also actively deploying short play business. We have done a lot of preparatory work from script selection and creation, copyright purchase and content production. The profit model of short play business needs further verification, but we believe that the core logic of short play market is content is king. As a company operating on content and copyright, we will definitely compare ourselves.

　　NFT technology

　　In June 2022, the risk warning announcement was disclosed: Recently, some media reported that the company was involved in "NFT concept stocks". In March 2022, the company and Changsha Malanshan Investment Development and Construction Co., Ltd. jointly funded the establishment of Hunan Malanshan Tianze micro chain Technology Co., Ltd., which mainly protected and traded digital assets based on copyright content. The "China V-Chain" project is at the initial stage of development, but it has not yet opened the online trading function. Before the formal transaction, the platform also needs to obtain the network culture business license, ICP license and other related business licenses, which can only be implemented after being approved by relevant departments according to laws and regulations. At present, Hunan Malanshan Natural Selection micro chain Technology Co., Ltd. is applying for approval of related businesses, and there is still uncertainty about whether the application can be approved. Please pay attention to the risks. On January 26, 2022, the company disclosed on the interactive platform: At present, the company has used blockchain technology for copyright deposit, and we are actively paying attention to NFT technology. The online trading of video content and materials owned by the company needs NFT technology for copyright protection and development of copyright. More market value.

　　Natural Selection of micro chain —— Overall Service of Digital Rights

　　In March 2022, Zhongguang Natural Selection and Changsha Malanshan Investment Development and Construction Co., Ltd. established Hunan Malanshan Natural Selection micro chain Technology Co., Ltd. The core business of Tianxuan micro chain is to operate the overall digital rights service platform "China V-chain". By the end of 2022, there were more than 160,000 online copyright trading materials and 150,000 blockchain deposits. At present, "China V-Chain" has obtained 7 licenses required by online platforms for copyright services and transactions, and was selected as "National Radio and Television Media Convergence Growth Project in 2022". In December, 2022, Natural Selection micro chain released the "Collective Copyright Service Plan", which uses its own blockchain to form six service systems: works planning, classification and registration services, establishment of exclusive digital copyright material database, monitoring of works’ use rights throughout the network, evidence storage and notarization, automatic distribution of cases, diversified dispute resolution, authorized use and deep IP development of works, assets evaluation of works’ related rights and interests, and listing and transfer transaction services. In 2023, while continuing to serve copyright and intellectual property customers, it will also establish a V-chain copyright management SAAS system to realize the blockchain system link with relevant functional institutions and judicial acceptance, and use advanced digital intelligence, technology and accurate services to make intellectual property more valuable.

　　Comprehensive media group

　　For many years, Zhongguang Tianxuan has always adhered to the principle of "positive energy, natural selection", being the organizer of head content, an expert in vertical field and an operator of all-media content, and building a comprehensive media group with national influence. In 2021, the company has six strategic sections: content division, platform division, MCN center, film and television drama center, film center and education center, with more than 300 professional video producers, mainly engaged in the production and operation of variety shows, documentaries, film and television dramas, short videos and other video content.

　　Film and television center-investment and investment system of fine film and television

　　Since its establishment in 2018, Tianxuan Film and Television Center has produced, organized and invested in nearly 150 projects. After fully opening the paid track with differentiated and high-quality projects, it has gradually moved towards TV dramas and customized tracks for "film and television travel". In terms of online movies, box office breakthroughs have been continuously achieved, and genre innovations have been expanded: Ghost Story broke through 40 million, setting a new benchmark in the industry; the first phenomenal online movie daoist magic broadcast on dual platforms broke through 50 million, ranking among the top three in the online movie sub-account list in recent three years together with Ghost Story; in terms of online sub-account drama, a new platform record has been set year by year: Flash! Breaking the double records of iQiyi’s popularity and box office in 2022 with a sub-account box office of over 100 million yuan, Dear Mr. Lemon Essence broke through 58 million yuan, ranking first in Youku’s online sub-account drama in 2021. In TV series, Parabola of Youth inherits the spirit of China Women’s Volleyball Team and is well received. While investing and "investing", Tianxuan Film and Television Center also participated in the creation of CCTV’s large-scale documentary "For Peace", which was highly praised by China People’s Liberation Army News and Communication Center. Making the first digital film "Dragon Gate" for the world cultural heritage of Longmen Grottoes in Luoyang will be the first digital dome film of grottoes in the past decade, and it will be the first stop of the immersive cultural tour of Longmen Grottoes by means of "film and television travel".

　　Film Center —— Investment Pioneer of Sub-account Content

　　Zhongguang Natural Selection Film Center focuses on the investment of sub-account content, enters online movies and sub-account online dramas, and opens up paid tracks. In recent years, the natural selection film industry has gone from joint production TOP1 main production, and the main producer has invested in nearly 100 projects, such as Ghost Story: Human Love, daoist magic, Snake King, Flash China, Surprise Tunnel Warfare, Dismantling the Case, Murder Scene, etc., which have been launched on major video platforms one after another, among which the romantic fantasy movie Ghost Story: Human Life. As the first online movie broadcast on dual platforms, daoist magic, a fantasy martial arts action movie, ranks in the annual box office list of Aiqiyi and Tencent Video, which is the highest in the history of online movie box office. The positive energy online movie Flash China ranks first in the hot search list of Aiqiyi, second in the list of Tik TOP1 movies, the online movie of war and epidemic won the best film of the 10th Beijing International Online Movie, and mortal hero was selected as the network audio-visual quality project of SARFT. The rural comedy Erlonghu Love Story 2021 and the urban emotional drama Dear Mr. Lemon Essence are both box office champions in the same theme drama, ranking the top three in the Youku drama list and topping the Youku drama list for many times.

　　Platform Division-Pioneer of Copyright Operation

　　Zhongguang Natural Selection Platform Division has been rooted in copyright operation for many years. The two national trading platforms, Taoju Taotao and Program Purchase, focus on copyright creation, copyright protection, industrial development, copyright trading and other fields to promote the development of copyright industry, and have a good leading and exemplary role in copyright units across the country. With the ability to link the national transmission and the copyright integration of high-quality TV dramas, "Taoju Taotao" was successfully selected into the "National Radio and Television and Network Audiovisual Industry Development Project Library".

　　Original title: The CPPCC Chairman’s Meeting made a suggestion that the construction of the "two districts" should adhere to the "national trial system" and form a number of "Beijing rules"

　　On July 28th, the CPPCC held a meeting of deliberative chairmen to discuss and discuss politics around the topic of "actively docking the rules of international high-level free trade agreements and promoting new progress in the construction of the’ two districts’". The joint research group of CPPCC (hereinafter referred to as the research group) proposed that to promote the docking of international high-level free trade agreement rules between the two regions, we should always adhere to the orientation of "trying the system for the country", accelerate the landing of a number of breakthrough, dynamic and effective institutional innovations, and form a number of influential "Beijing rules" and "Beijing standards".

　　Status quo: Beijing’s "two districts" construction has achieved positive results.

　　The research team believes that since the start of the construction of "two districts", the municipal party committee and government have insisted on the construction of "two districts" as an important "sub" to promote the linkage service of "five districts" and integrate into the new development pattern, focusing on key industries, key parks, institutional systems, factor supply and other fields, and grasping the breakthroughs in policies, institutional mechanisms and international development environment, and have achieved positive results in institutional innovation, forming a number of practical cases that have been promoted nationwide.

　　International free trade agreements involve a wide range of contents. What aspects should be emphasized in the "two regions" docking? The research team suggested that we should focus on Beijing’s advantageous industrial fields such as scientific and technological innovation, service industry opening-up and digital economy, and try our best to highlight Beijing’s characteristics.

　　Analysis: Service trade is the key area of the new round of international economic and trade rules reconstruction.

　　In the face of the unprecedented changes in the past century, the international economic and trade rules are undergoing profound changes. The research team believes that "negative list"+"national treatment before entry" has become the main feature of the new round of international investment and service trade commitments. Strengthening the "three zeros" principle of zero tariffs, zero barriers and zero subsidies is an important trend in the new round of international economic and trade rules reconstruction. In addition, service trade has become the key area of the new round of international economic and trade rules reconstruction, and digital trade is becoming the new focus of competition for rule reconstruction.

　　The research team pointed out that compared with international high-level free trade agreements, China not only faces the challenges of "border" measures such as market access, service industry opening, and cross-border data flow, but also involves a series of "post-border" rules such as industrial subsidies, state-owned enterprise reform, and intellectual property protection. These are the areas and directions that should be focused on in the future.

　　Recommendation 1: Further relax the quasi-operation of foreign investment.

　　The research team suggested steadily promoting the liberalization and facilitation of trade and investment. Further relax the admission of foreign capital. Introduce municipal management measures and support policies as soon as possible, and encourage and guide foreign-invested adult education and training institutions and vocational skills training institutions to develop in Beijing; Reduce the entry threshold for international medical institutions, and relax the restrictions on the establishment of departments, personnel and institutional area for international medical institutions to open hospitals and outpatient departments in the Free Trade Zone. In terms of cultivating new trade formats and new models, the research team suggested that anticancer drugs, drugs for rare diseases and over-the-counter drugs should be included in the pilot category of selling pharmaceutical products in cross-border electronic commerce, and the pilot of selling pharmaceutical products in cross-border electronic commerce should be accelerated; Promote the pilot business model of "online shopping bonded+offline self-raising" to extend from the special customs supervision area to the free trade zone, duty-free shops in the city, and cross-border e-commerce experience stores.

　　Recommendation 2: Explore the establishment of a "data customs"

　　Data security management is an unavoidable topic in the opening of digital trade. The research team suggested that the data classification and classification management system should be established and improved. Study and formulate rules for data classification and grading at the municipal level, clarify the identification standards for general data and important data, strive for support at the national level, and select some industries and enterprises to carry out pilot projects for data classification and grading management.

　　The research team also suggested actively promoting the pilot system of "Personal Information Protection Authentication", "Data Exit Standard Format Contract" and "Cross-border Data Flow Security Agreement" to improve the efficiency of data security assessment and lay the foundation for cross-border data flow and data asset transaction. Relying on the Digital Trade Port and Beijing International Big Data Exchange, we will explore the establishment of a "data customs" and support several Beijing data cross-border hosting service platforms to explore data compliance assessment and cross-border services.

　　Recommendation 3: Promote the establishment of Beijing-Tianjin-Hebei information sharing mechanism.

　　The research team proposed to explore the introduction of international specialized intellectual property service institutions and accelerate the construction of an international intellectual property trading center. Relying on big data, cloud computing, Internet of Things and other technologies, we will establish an international-oriented public service platform for intellectual property operation in the Free Trade Zone, realize one-stop service for rapid review, confirmation and rights protection of intellectual property rights, and promote the facilitation of cross-border transactions of intellectual property rights; Promote the establishment of Beijing-Tianjin-Hebei intellectual property information sharing mechanism and build a regional unified intellectual property network service platform. (Wu Hongli)

　　 Recently, we learned from relevant channels that BMW i4 will launch three models in the initial stage of listing. In terms of power, the new car provides three kinds of power and two driving modes: rear drive and four-wheel drive. It is reported that BMW i4 will be produced in Munich factory and is expected to be released at the end of 2020 or early 2021.

　　 In terms of appearance, the front face of the new car adopts a closed kidney grille, and blue embellishment is added around it to highlight its new energy identity. The shape of the tail is wider, and the rear deflector can enhance the aerodynamic performance while enhancing the sporty atmosphere. In addition, a duckling tail design is added to the trunk of the car, which further enhances the visual effect.

　　 In terms of power, the entry-level version of BMW i4 is named i435, which adopts single motor and rear drive layout with a power of 209kW；. The mid-equipped model or i440 is equipped with an upgraded motor with a power of 246kW, which also adopts the rear-drive layout; The top model or i4 M50 is equipped with dual motors and four-wheel drive layout, and the total system power is expected to be between 336 and 343 kW.

The People’s Bank of China announced that a common commemorative coin for the 2021 New Year will be issued on January 29th, 2021.

This commemorative coin has a diameter of 27 mm and is made ofDichromatic copper alloyThe front pattern is the words "China People’s Bank" and "10 yuan", the Chinese phonetic alphabet "SHIYUAN" and the year number "2021", and the background pattern is lined with a group flower pattern.

On the back, the main scene pattern is a head-raised cow shape which combines the traditional paper-cutting art of China with the decorative New Year pictures. The background pattern is lanterns and grains, and the words "Xin Chou" are printed on the left side of the coin face.

Public security features:

1. Bimetallic structure and inner core composite materials

The outer ring of the coin is brass alloy, and the inner core is nickel tape composite copper material with unique machine-readable properties.

2. Inclined full teeth are separated by half teeth

The outer edge of the coin is distributed withAlternately arranged oblique full teeth and half teeth.

3. Invisible graphics and text

When the coin is tilted at an appropriate angle, two groups of invisible pictures and texts consisting of three "10" and "RMB" can be observed in the contour line of the front denomination number "10".

4, miniature text

At the bottom of the denomination number "10" on the front of the coin, the miniature characters of "RMB 10 YUAN" can be observed.

The denomination of this commemorative coin is 10 yuan., the same as the current circulation of RMB, and the same denomination of RMB equivalent circulation.

The number of issues is 150 million pieces, including 140 million pieces of reserved exchange (including 10,000 pieces of historical currency files) and 100 million pieces of binding sales.

The so-called preservation of historical currency files means that every time the central bank issues a new currency, it keeps a certain amount in the issuing library as a physical file for future currency research.

The number of commemorative coins distributed in various regions of the country is as follows:

(The number of Guangdong Province does not include the number of Shenzhen)

Attached is the work arrangement for the appointment and exchange of ordinary commemorative coins for the New Year in 2021:

(1) Banking financial institutions that undertake the exchange appointment.

China Industrial and Commercial Bank, Bank of Communications, Shanghai Pudong Development Bank (600,000 shares), Huaxia Bank (600,015 shares) and Shaanxi Rural Credit Cooperatives Union jointly undertake the reservation and exchange of 2021 Lunar New Year commemorative coins (hereinafter referred to as Lunar New Year coins).

The above-mentioned banking financial institutions in Hebei, Shanxi, Inner Mongolia, Liaoning, Hunan, Guangxi, Sichuan, Guizhou, Yunnan, Qinghai, Ningxia and Xinjiang counties have no outlets, and the appointment exchange work is undertaken by China Postal Savings Bank; In areas where there are no outlets in Tibet, the appointment exchange work is undertaken by the Agricultural Bank of China.

The above-mentioned banking financial institutions that undertake the appointment exchange of New Year’s coins are collectively referred to as the appointment undertaking banks, and the specific arrangements for each region are as follows:

(two) the number of appointments around the announcement.

Before 12 o’clock on January 22, 2021, the branches of the People’s Bank of China announced to the public the information such as the number of local New Year coins allocated.

The booking bank will publish information such as the booking exchange outlets and the number of reservations at each outlet on its official website.

(3) Appointment arrangement

Make an appointment with the undertaking bank atFrom 22: 30 on January 22 to 24: 00 on January 24, 2021.Deal with the new year’s money reservation business.

The public can make an appointment to register through online channels such as the official website of the appointment undertaking bank or go to the outlets that handle on-site appointment business during their business hours (announced by the appointment undertaking bank). The online appointment of Shaanxi Rural Credit Cooperatives Union is handled through the online appointment channel of Industrial and Commercial Bank of China.

The time for the booking bank to start the online booking channel for Lunar New Year coins in all provinces, autonomous regions and municipalities directly under the Central Government is as follows:

Beijing, Tianjin, Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Shandong, Henan, Tibet, Shaanxi, Gansu, Qinghai, Ningxia, Xinjiang and other regions.At 22: 30 on January 22, 2021Start an appointment;

Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Hubei, Hunan, Guangdong (including Shenzhen), Guangxi, Hainan, Sichuan, Guizhou, Yunnan, Chongqing and other regions.At 23: 30 on January 22, 2021Start the appointment.

The People’s Bank of China will check all the reservation registration records of Lunar New Year coins. Members of the public who make repeated reservations for New Year’s coins cannot pass the verification and cannot exchange them. The public can log on to the official website of the booking bank after 24: 00 on January 26, 2021 to check the booking results.

Each booking bank will send short messages to feed back the booking results according to the mobile phone number reserved by the public at the time of booking. The specific appointment results shall be subject to the appointment of the official website of the bank.

(4) Advance redemption limit

Each person can reserve and exchange 20 New Year coins.

(5) Requirements for identity documents

The valid identity documents for appointment and exchange of New Year’s money must be the original of the second-generation resident identity card.

The public must hold their original valid second-generation resident ID card when making an appointment at the bank outlet for on-site appointment; If you make an on-site appointment on behalf of others, you must provide the original second-generation resident ID cards of the agent and the agent, and the number of agents shall not exceed 5.

(six) the appointment verification period arrangement

January 27th to 28th, 2021 is the appointment verification period. During the appointment verification period, members of the public who fail to pass the verification can hold the original of the second-generation resident ID card for appointment registration, and go to the appointment undertaking bank outlets for cancellation of default records and reservation of exchange qualifications. See Announcement of the People’s Bank of China ([2019] No.26) for the specific handling process.

If the public handles the business of canceling the default record and retaining the exchange qualification on behalf of others, they must provide the original second-generation resident identity cards of the agent and the agent.

(7) Exchange arrangements

Make an appointment for the bank to handle the new year’s currency exchange business from January 29 to February 4, 2021. The public can hold the original valid second-generation resident ID card registered in the reservation system at the agreed time, and go to the agreed appointment bank outlet to handle the appointment exchange business.

Branches of the People’s Bank of China may, according to the requirements of epidemic prevention and control, adjust the local appointment exchange time and make a separate announcement.

If the public collects New Year’s money on behalf of others, they must hold the original valid second-generation resident ID card registered by the consignee in the reservation system, and the number of recipients shall not exceed 5.

(8) Announcement of reserved exchange information.

The People’s Bank of China and the booking bank will announce the progress of online booking, on-site booking and exchange in all regions of the country on their official websites every working day during the booking and exchange period of Lunar New Year coins. middle

The Shanghai headquarters of the People’s Bank of China, all branches, business management departments, provincial capital city sub-branches and Shenzhen city sub-branches will announce the online reservation, on-site reservation and exchange progress in their respective jurisdictions on their official websites every working day during the New Year’s currency reservation and exchange period.

During the issuance of Lunar New Year coins, the supervision and reporting telephone numbers of all provinces (autonomous regions and municipalities) were announced. Public inquiries and supervision are welcome.

– THE END –

Please indicate the source: fast technology.

# Central Bank # Commemorative coins

　　In recent years, the concept of suburban holiday leisure tour has been deepened, including but not limited to tent camping, beach barbecue, lawn frisbee and other light tourism projects. Along with this concept, SUVs with a hard-core style have gradually become popular.

　　As far as the new hard-core cars listed in the past year or two are concerned, there are no fewer than ten models, which shows the popularity of such sub-models. In my opinion, these hard-core style SUVs are on fire, but it is better to say that everyone’s mentality has changed. The pressure of employment and life in cities is great, and there is no better way to decompress in cities. With off-road vehicles, you can get closer to nature. For yourself, you have found a new way of life, so correspondingly, the demand for off-road vehicles has started to increase, and off-road vehicles have naturally become popular.

　　In addition, in the past, the SUV with hard-core style was either too expensive or uncomfortable to drive, but now the price of the model has become very close to the people and the comfort has been qualitatively improved. Today, the Jetway I test-drive is such a model, so what about the answer sheet it handed over?

　　In terms of appearance, Jetway Traveler, as its name implies, adopts the popular hard-core design and adds many outdoor elements to the details. And the most surprising thing is that the production model has highly restored the design of the previous T-X concept car, so the new car still looks very bright.

　　In the front face, the front of the car is tall and straight, and the front face is rich in layers. The blackened grille also integrates the ""brand logo that can be lit with the headlights, and the headlights on both sides adopt square elements. In addition, the front bumper and front and rear wheel eyebrows are equipped with LED light sources, and additional light sources can also be provided during travel or parking and camping.

　　The overall shape of the headlights is square, but the LED strip with longitudinal arrangement is adopted in the interior cavity, which not only creates a tough style, but also has strong scientific and technological attributes. This design is also the mainstream design of the current hard-core SUV, which is very pleasing.

　　Looking down again, you can see that the overall black bumper is very thick, and the tough lines have a little mecha design style. The details are also very rich. First of all, the trailer hook is common in hard-core models, but travelers paint it fluorescent, and in addition to fog lights, the bumper is also equipped with fill lights, which provide additional light sources in poor lighting conditions or camping.

　　Viewed from the side of the car body, Jietu Traveler adopts the square design used by many hard-core SUVs. The window frame is angular, and the large black wheel eyebrows protrude outward, which is very consistent with the positioning of the whole car. In the transition from C-pillar to D-pillar, the window line began to rise gradually, which increased the fashion sense of the side.

　　Jetway Traveler’s original factory is equipped with a very wide pedal, which is tough enough. However, for people who are taller, it is easy to get dirty without stepping on the pedal. If the pedal is slightly narrowed, the effect is expected to be better.

　　In addition, the front and rear rows are equipped with wide handles, which makes it more convenient for the elderly or children to get on and off.

　　In the details, the front and rear wheel eyebrows are also equipped with lights, and the roof rack is also decorated with fluorescent colors. In terms of body size, the new car is positioned as a medium-sized off-road SUV with a length, width and height of 4785×2006×1880mm and a wheelbase of 2800mm respectively.

　　In terms of rims, in order to cater to the hard-core modeling, the 19-inch blackened rims also adopt a thick multi-spoke style, and the details such as the hub cover are also painted in fluorescent color. And today’s test drive models are also equipped with Jiatong brand AT tires, which are 255/60 R19 in tyre size.

　　A large number of rounded rectangular design elements are also applied to the tail, and the outline is relatively rough. Above the tailgate, a small square schoolbag is hung with an external rear spare tire, which is also the standard configuration of the main hard-core style models.

　　At the same time, the vertical taillights are wrapped in a black frame and integrated with the black decoration on the upper part, showing a strong off-road temperament. The tailgate is also in the form of side opening. It is worth mentioning that the tailgate has a borderless design and looks more textured. Moreover, the tailgate also has an electric suction function, which is definitely a plus item.

　　The design of the rear bumper is consistent with the front of the car, and the shape is very strong. At the same time, the rear of the car also has LED fill light.

　　In the interior part, Jetway Traveler adopts the popular minimalist design style as a whole. The center console has a traditional T-shaped layout, but the interior looks more powerful through angular lines. At the same time, the four-spoke steering wheel with flat bottom up and down and the suspended large-size multimedia screen add a strong sense of science and technology to the interior.

　　In terms of materials, the car is also wrapped in soft and leather materials in a large area, and the interior color matching of the double fight looks fresher and more energetic. In addition, the square air conditioning air outlet, the handrails on both sides of the gear handle and the door handrails all create a sense of strength for the interior.

　　In addition, the decorative board in front of the co-pilot is composed of self-driving routes, which is more in line with the positioning of the model. This small detail is still very careful.

　　In terms of intelligent configuration, the screen size of the car is 15.6 inches, and 8155 chips are built in, so the response speed of the system is completely unnecessary to worry about. Moreover, the functions of the interior app application and intelligent voice control are also consistent with the mainstream models, and it is still very easy for young people to get started.

　　In other aspects, the new car is also equipped with 50W mobile phone wireless charging, fatigue driving reminder and other functions.

　　The shape of the electronic gear lever is very strong, which is very consistent with the positioning of its hard-core SUV, and the grip is also very comfortable, and the damping feeling of the lever is also very advanced.

　　Behind the handlebar are the shortcut buttons for driving mode, air conditioning A/C and panoramic image system, which is convenient for blind operation.

　　The chair is generous in shape, covered with suede material, delicate in touch and high in texture, and the letter LOGO "JT" is also marked on the back of the chair. Moreover, the fabric is soft and comfortable.

　　The rear seats are also spacious and comfortable, the rear backrest supports two angle adjustments, the central floor is also very flat, and it is equipped with air conditioning outlets and power interfaces. In terms of seating space, after the front seat is adjusted to the position of 1,9m adult male, the back seat will be an adult male with a height of 1.9m. The head and leg space still have more than one punch, and the space performance is excellent.

　　In terms of storage space, there are more than 50 storage spaces in the car, which are very rich. There are spacious storage spaces in front of the co-pilot, under the bumper and in the armrest box, which is very convenient for placing personal belongings.

　　In terms of trunk space, the overall volume is basically the same as that of the hard-core SUV of the same level, mainly because the lateral width is average, but the overall space is very regular, and after putting down the rear seats, it can form a very flat space, plus the shape of the generous box, which makes the storage space in the car very regular, and it is no problem to cope with daily family trips.

　　It is worth mentioning that the configuration of the trunk is very rich, with 12V cigarette lighter, 220V power supply, net bag and anchor point. Moreover, there are two hooks and two folding cup holders in the rear door, which are very practical for long-distance travel or camping in the suburbs.

　　In terms of power, the models of this test drive are all equipped with 2.0T Kunpeng power, the maximum power of the engine is 187kW, and the maximum torque is 390 Nm. In terms of transmission, it is matched with the 7DCT gearbox. In addition, Jetway Traveler also offers a 1.5T version to choose from.

　　This time, our main experience is its four-wheel drive performance. The 2.0T version of Jetway Traveler comes standard with Borgwarner’s sixth-generation four-wheel drive system, which can automatically switch four-wheel drive modes and intelligently distribute rear wheel torque. At the same time, it provides six driving modes: economy, standard, sports, snow, sediment and rock. It is worth mentioning that in addition to the above six driving modes, Jetway travelers also provide X mode, which can intelligently identify the road conditions, switch the corresponding modes, and always ensure the best driving state. In my opinion, this mode can be understood as a fool camera, and all the parameters are adjusted for you. Just click on it, which is a very practical function for off-road white. (And this cross-country experience is completed in X mode.)

　　In addition, Jietu travelers also have a approach angle of 28, a departure angle of 30, a minimum ground clearance of 220mm and a wading depth of 700 mm. For an SUV built with a load-bearing body, it can be said that the hardware is almost full.

　　In the actual experience, the four-wheel drive system can sense the tire idling in time and quickly lock the idle wheel, and the electronic slip-limiting intervention is also timely. It is no problem to get out of trouble in the face of the occasional challenges of the subject of experience, and it can also get out of trouble in time when the single rear wheel has adhesion. With the help of the car body data and the four-wheel drive system, its passability is indeed better than that of the general urban SUV.

　　During the 28 climbing experience, Jetway Traveler’s 2.0T engine has enough torque output, and it is easy to climb to the top of the hill with continuous and steady oil supply. Moreover, the AT tires equipped by the original factory did not slip too much during the constant climbing process, and the whole process was very easy. In addition, agile travelers also have the ability to cross a 45 slope.

　　It is worth mentioning that there is also a "cross-country dial" function in the car-machine interface. The left half can display functions such as compass, altitude, pitch angle, roll angle and wading radar, while there is a 3D model on the right, which can display tire pressure, tire temperature, front and rear power distribution, etc. The function is very comprehensive, and it is very playable and practical for hard-core positioning models.

　　The steering force is moderate, and it will be easy to get used to it. When passing on rough off-road roads, the steering will not flick. The gentle steering force is very easy for fine exercise and more controllable.

　　On the unpaved road section composed of gravel roads, the chassis of Jietu Traveler gave me a big surprise. On the high-frequency continuous vibration, the chassis inside the car felt very tight, and there was no unnecessary shaking. Moreover, after the vibration was resolved by the suspension and seat, it was not stiff to be transmitted into the car. In addition, there is no abnormal sound of any decorative parts in the car during high-frequency bumps, and the overall performance can be satisfactory.

　　With the timely four-wheel drive of Borgwarner, the system can accurately brake to lock the skidding wheels according to the road conditions. In the cross-axle test, it can be seen that Jietu travelers have a good suspension stroke, and the four wheels have no skidding phenomenon. As long as the throttle output is stabilized, they can easily pass.

　　When passing through the road surface composed of continuous tires, with strong torque output, Jietu travelers can also easily complete the challenge.

　　Although it is a load-bearing body, its body stiffness is greater than that of a general urban SUV, and its torsional stiffness reaches 31,000 nm/deg, which is enough to ensure that its body deformation is more controllable when facing road conditions such as cross shafts, so as not to make the car squeak. Moreover, it has a longer absorption time and more sufficient rebound absorption when experiencing some uneven roads, thus increasing the ability to get rid of difficulties.

　　In the actual experience, the four-wheel drive system can sense the tire idling in time and quickly lock the idle wheel, and the electronic slip-limiting intervention is also timely. It is no problem to get out of trouble in the face of the occasional challenges of the subject of experience, and it can also get out of trouble in time when the single rear wheel has adhesion. With the help of the car body data and the four-wheel drive system, its passability is indeed better than that of the general urban SUV.

　　From the actual experience, the passing ability of Jetway travelers is worthy of recognition, but I prefer to call it a light off-road vehicle, and this kind of vehicle will become more and more popular. Because in most families, most of them only have one car, so it is impossible to make a pure hard-core off-road vehicle+daily commuting model. Moreover, it is very rare for a large number of people to contact extreme cross-country The light off-road positioning car such as Jetway Traveler is a very balanced choice. The load-bearing car body can ensure enough comfort in daily commuting in the city, and the appearance of hard personality combined with good passing ability can also make you more comfortable and relaxed during the journey. Looking at the test price, it can be said that it is a new category of SUV within 150,000-200,000, which is worth a try for friends who like go on road trip.

In the era when face value is justice, the appearance of a model directly affects the choice of consumers. Generally speaking, the front face design of the new generation has become more luxurious, and some protruding lines are added to the hood, which looks quite muscular. The eagle-eye lights on both sides are quite huge, and they look very energetic after hexagonal adaptive lighting. The shape of the side with the waist line rising on the side creates a sense of readiness, which looks strong in movement, high in rim shape and acceptable in visual effect. The tight tail shape highlights the bold and firm posture, and the rear taillights of the new car are more recognizable.

The interior of the whole vehicle can be said to be very luxurious, extremely high-end luxury. The large leather coverage of the steering wheel brings a good sense of luxury. All the materials above the central control area are made of plastic, leather, wood and metal, which greatly enhances the sense of grade of the whole vehicle. The 10.25-inch central control panel is simple in screen design, but fully functional. The front row is also equipped with a dual-temperature automatic air conditioning control system, which can freely debug the most comfortable space atmosphere. Leather seats give passengers just the right support and soft and comfortable touch.

The length of the BMW 5 Series is 5175mm, the body width is 1900mm, and the wheelbase is 3105mm, which is quite satisfactory. In the same class, the wheelbase of the BMW 5 Series ranks fifth. One bright spot is that its width reaches 1900mm, which reflects that the horizontal space inside the car is not bad. The design of skylight also increases the subjective space feeling of front and rear passengers. Among the models of the same price and class, the trunk volume of BMW 5 Series ranks 31st. The shape is very regular, and the storage volume is absolutely no problem for daily use.

The BMW 5 Series 530Li exclusive luxury suit uses a 2.0 engine, with a maximum horsepower of 258 and a peak torque of 400, matching the automatic manual transmission (AT) gearbox. The power performance of the 2.0 engine on the BMW 5 Series is quite satisfactory, and the low torque is weak and the hysteresis can be felt. The official measured acceleration of BMW 5 Series is 6.5S, ranking 31st among the medium and large-sized cars with more than 800,000.

The active/passive safety configuration of BMW 5 Series is complete, includingAutomatic parking、Zero tire pressure endurance tire、Automatic parking、Steep slope descent、hill start assist control、knee airbag、HUD head-up display、Anti-lock braking (ABS)、Braking force distribution (EBD/CBC, etc.)、Brake assist (EBA/BAS, etc.)、Traction control (ASR/TCS, etc.)、Active noise reduction、Engine start and stop、Side safety air curtain、Wireless charging of mobile phone、night vision system、LED daytime running lights、Forward reversing radar、Tire pressure monitoring、Steering wheel heating、Body stability control (ESP/DSC, etc.)、Rear reversing radar、Fatigue reminder、Remote parking、Child seat interface、Lane keeping (LKAS)Equal configuration.

Among them,Automatic parkingYou can avoid stepping on the brakes for a long time or needing to pull frequently;Steep slope descentCan safely pass through steep slope road conditions at low speed;knee airbagReduce the injury of the car interior to the occupant’s knees in the secondary collision.

In order to have a more comprehensive and objective understanding of the BMW 5 Series, you can go to the Easy Car BMW 5 Series Forum and browse the messages of users who have purchased the car in history.

Tiantai Mountain Scenic Area is located in Qionglai City, an excellent tourist city in China, about 110km away from Chengdu. According to legend, Dayu controls water and climbs high to worship heaven, so it has the good name of "Tiantai". The scenic spot is a national key scenic spot, a national 4A-level scenic spot and a national forest park. It is an important part of the world natural heritage of Sichuan giant panda habitat and one of the eight firefly viewing bases in the world. There are more than 50 kinds of rare animals protected by the state, such as giant panda, red panda, macaque and giant salamander, and more than 20 kinds of rare plants protected by the state, such as Davidia involucrata, yew and ginkgo.